The LayFomm 60 is another 3D printing filament created by Kai Parthy, the creator of such filaments as LayWood, Lay Brick and Reflect-o-Lay. LayFomm 60 filament is a 3D printing material with two components: an elastomer similar to rubber (TPU) and a water-soluble (PVA). After printing, place the item in water. After one to four days water-soluble (PVA) component dissolves. As a result, we received a very porous and flexible object that looks like foam. LayFomm 60 is slightly firmer than LayFomm 40.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PA6 filament is characterized by very good mechanical strength, flexibility and excellent adhesion of individual layers. Tarfuse PA6 is a filament dedicated to printing functional and technical parts in such industries as automotive, mechanical engineering, railways, construction industry, and electrical engineering.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PA6 filament is characterized by very good mechanical strength, flexibility and excellent adhesion of individual layers. Tarfuse PA6 is a filament dedicated to printing functional and technical parts in such industries as automotive, mechanical engineering, railways, construction industry, and electrical engineering.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of bright orange PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

ASA (Acrylonitrile Styrene Acrylate) is a UV-resistant weatherable polymer. Our ASA has a low-gloss matte finish that makes it a perfect filament for technical prints - especially when you don't want the high-gloss surface finish often associated with many other 3D printing materials such as ABS, PETG, or PLA.  ASA's UV stability makes it an ideal material for outdoor applications that will experience intense exposure to the sun and weather.  ASA's exceptional mechanical and thermal properties - coupled with excellent UV stability - is why this resin is used in the Auto, Marine, and RV industries for exterior applications such as mirror housings, cowl covers, radiator grills, and sensor housings. 

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Polymaker PolyLite PLA filament 1,75 mm, that changes colour from green to lime under the influence of temperature. Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.