Featured products

Polymaker PolyLite PLA contains an additive thanks to which the printed element glows with its own, in this case, blue, light after prior exposure to light from the outside. Polymaker PolyLite PLA  is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

The highest quality filament for 3D printing Everfil PCTG was made by a Polish manufacturer, 3D Kordo.

Everfil PCTG material belongs to the same family of polyesters as the popular PETG. it is characterized by significantly increased resistance to mechanical damage than PETG. Depending on the quality of the product, PCTG filament can be up to 20 times more resistant to falls or sudden impacts. PCTG filament is often used for the production of components that are particularly exposed to direct contact with various chemicals. PCTG filaments after printing retain high optical transparency. The material is also suitable for contact with food because PCTG filaments do not contain harmful BPA. PCTG printouts are characterized by high dimensional stability, maintaining the required strength and can be subjected to sterilization processes.

Tarfuse® PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.

Filament for 3D printing PETG of the Polish manufacturer 3DKordo in blue matte. The modified polymer composition allows you to achieve a beautiful matte finish of the printed element.

PETG filament is a thermoplastic polymer from a group of polyesters in a utility version, intended for 3D printing using the FFF method. PETG filament, also known as polyethene terephthalate, is a copolyester known for its conductivity and ease of use. PETG filament has the stiffness and mechanical properties of ABS filament but is as easy to print as PLA filament.
The filament for printing PETG from the manufacturer 3DKordo is wound on a spool, it appeared in a vacuum.

Temperature Range:
240 – 280 °C

Recommended 3D printing temperature:
250 – 270 °C

Recommended 3D print speed:
30 – 90 mm/s

Recommended Heated bed:
If equipped set Heating Bed to 80 °C

The PETG material is essentially the same as the known PET material from which PET bottles are made. The G in the acronym PETG stands for Glycol which is added during the manufacturing process. Glycol modifies the properties of PET so that it’s easier to print and less brittle. It is a strong and tough material, which is characterized by good thermal stability. Thanks to the small shrinkage during printing, it is suitable for printing large objects. PETG has mechanical and thermal properties better than ABS and bears the printing properties of PLA. 

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA HS BK filament, made of polyamide 6 (PA6), is characterized by very good mechanical strength and contains a thermal stabilizer that enables continuous operation, the details of which in the reinforcement reach 130°C.