ABS 1,75 mm

The set contains 6 spools of 0,33 kg of ABS filament in colours: white, bright yellow, red, bright green, blue and black.

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

ABS (akrylonitrilbutadienstyren)
- more suitable for advanced makers
- for both small and large prints
- strong and tough material with a high surface hardness
- impact and heat resistance (up to 90 °C)
- acetone-soluble (easy post-processing)
- typical smell
- thermal contracting (closed chamber recommended)

ABS (akrylonitrilbutadienstyren)
- more suitable for advanced makers
- for both small and large prints
- strong and tough material with a high surface hardness
- impact and heat resistance (up to 90 °C)
- acetone-soluble (easy post-processing)
- typical smell
- thermal contracting (closed chamber recommended).

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

Filament coiled on a bobbin vacuum packed together with a desiccant. Filament compared to standard ABS material it is characterized by a reduced shrinkage processing, improved bonding layers, and six times greater flow ratio.

Recommended printing temperature 235-255 °C

Heated bed temperature - 90-100°C

Print speed - 55mm/s

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

Filament produced on request marwiol by renowned Polish manufacturer Devil Design.

Filament coiled on a bobbin vacuum packed together with a desiccant. Filament compared to standard ABS material is characterized by reduced shrinkage processing, improved bonding layers, and a six times greater flow ratio.

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

Filament produced on request marwiol by renowned Polish manufacturer Devil Design.

Filament coiled on a bobbin vacuum packed together with a desiccant. Filament compared to standard ABS material is characterized by reduced shrinkage processing, improved bonding layers, and a six times greater flow ratio.

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.