Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PETG FR is a flame-retardant material in class V0 UL94. It is made of high-quality PETG modified with cyclohexanedimethanol. This material is characterised by high mechanical strength, good adhesion of individual layers, and low linear shrinkage. It is characterised by high ease of printing at the level of unmodified PETG. It does not contain halogen derivatives, red phosphorus or asbestos

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Plastic filament out of PLA 2,85 mm in black, white, yellow, orange. 

Kit contains 25 sticks for the 3D pen.

Filament produced in the Czech Republic.

The PETG material is essentially the same as the known PET material from which PET bottles are made. The G in the acronym PETG stands for Glycol which is added during the manufacturing process. Glycol modifies the properties of PET so that it’s easier to print and less brittle. It is a strong and tough material, which is characterized by good thermal stability. Thanks to the small shrinkage during printing, it is suitable for printing large objects. PETG has mechanical and thermal properties better than ABS and bears the printing properties of PLA. 

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA6 CF10 filament is polyamide 6 (PA6) reinforced with staple carbon fibre (10%). Thanks to this, the material has antistatic and electrically conductive properties. It is perfect for printing elements with high strength requirements. Printed elements are characterised by reduced water absorption.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

250˚C – 270˚C

Printing Speed:
30 – 50mm/s

Bed Temperature:
90˚C – 105˚C

Chamber Temperature:
90˚C – 100˚C

Young’s Modulus:
1832 ± 65 (MPa)

Tensile Strength:
39.9 ± 1.0 (MPa)

Bending Strength:
66.3 ± 1.3 (MPa)

Charpy Impact Strength:
25.8 ± 1.4 (kJ/m2)

PLA filament glowing in the dark 1,75 mm.

PLA 3D printing filament by the Polish manufacturer, Devil Design, containing an additive thanks to which the printed element glows with its own, in this case, blue, light after prior exposure to light from the outside.

Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.

Regular PLA is a very brittle material, which greatly limits its range of applications.  Polymaker PolyMax PLA was designed to change this.  Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.