Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

Filament for 3D printing ABS+ by recognized Polish manufacturer, Devil Design. ABS filament is a material for 3D printing with high hardness, and resistance to cracks and scratches. The ABS+ filament by Devil Design contains an additive that reduces the shrinkage of the material during cooling down. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected against third-party material and open-source designs. ABS+ is easily subjected to mechanical processing such as grinding or drilling. The ABS+ filament is soluble in Acetone.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of grey PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA12 GF30 filament is polyamide 6 (PA6) reinforced with staple glass fibre. Thanks to this, the material has antistatic and electrically conductive properties. It is perfect for printing elements with high strength requirements. Printed elements are characterised by reduced water absorption.

PLA filament was produced on request by marwiol.com by Polish manufacturer 3D Kordo. Our 3D printing filament combines high quality at an affordable price.

3D printing filament wound on a spool and vacuum packed. The spool contains 1 kg of silver PLA filament 1,75 mm.

PolyLite PLA is a high-quality PLA designed for reliability and ease of printing. This UV-changing PLA changes colour to Orange when under UV light or sunlight. Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology ensuring consistent extrusion and preventing jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest developments in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.