PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Sparkly violet PETG 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

PolyPlus™ PLA is a premium PLA designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, PolyPlus™ PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle-jams!

Gel-Lay is another 3D printing filament created by Kai Parthy, the creator of such filaments as LayWood, Lay Brick and Reflect-o-Lay. Gel-Lay filament is a 3D printing material with two components: an elastomer similar to rubber (TPU) and a water-soluble (PVA). After printing, place the item in water. After one to four days water-soluble (PVA) component dissolves. As a result, we received a soft, porous item. Importantly, the pores are not visible to the naked eye. The Gel-Lay filament is characterized by negligible deformation during printing.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of brick red PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of flashy yellow PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

The highest quality filament for 3D printing nylon PA12 was made by a recognized Polish manufacturer, Devil Design. Nylon PA12 is a semi-crystalline plastic that is resistant to high temperatures and chemicals. Items printed with this 3D printing filament can be finished with metalworking tools. The Devil Design nylon PA 12 filament is wound on a spool, vacuum packed with a moisture absorber. The spool contains 0.8 kg of net material.