Filament for 3D printing ABS+ by recognized Polish manufacturer, Devil Design. ABS filament is a material for 3D printing with high hardness, and resistance to cracks and scratches. The ABS+ filament by Devil Design contains an additive that reduces the shrinkage of the material during cooling down. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected against third-party material and open-source designs. ABS+ is easily subjected to mechanical processing such as grinding or drilling. The ABS+ filament is soluble in Acetone.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 0,33 kg of pink PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

Spectrum 5Pack sets have been created so that each customer can create various elements in a wide range of colours and materials without having to purchase more of a single type of filament.

The Spectrum 5Pack PCTG Premium 1.75mm (5x 0.25kg) includes the following products:

- PCTG Premium Arctic White

- PCTG Premium Deep Black

- PCTG Premium Lion Orange

- PCTG Premium Transparent Green

- PCTG Premium Transparent

Filament for 3D printing ABS+ by recognized Polish manufacturer, Devil Design. ABS filament is a material for 3D printing with high hardness, and resistance to cracks and scratches. The ABS+ filament by Devil Design contains an additive that reduces the shrinkage of the material during cooling down. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected against third-party material and open-source designs. ABS+ is easily subjected to mechanical processing such as grinding or drilling. The ABS+ filament is soluble in Acetone.

PolyFlex™ is a highly flexible yet easy to print 3D printing material. Featuring good elasticity and a large strain-to-failure, PolyFlex™ opens up a completely new realm of applications. jams.

PolyFlex™️ TPU90, created from Covestro’s Addigy®️ family, is a thermoplastic polyurethane (TPU) based filament designed to provide great flexibility without compromising on printing speed. It also has the ability to resist ultra-violet (UV) light or sunlight.

Smartfil PVA or polyvinyl alcohol is a water-soluble filament used as support material in 3D printing. It is especially recommended to use for PLA pieces to reach those points where the support structure is complex or inaccessible. Later, it can be removed by putting the piece in water, It is also a biodegradable filament, non-toxic and odourless.

Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!