Featured products

PA12 filament (nylon) - semi-crystalline polyamide in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 0.33 kg net of material. It can be used on all FFF printers that are not protected against material from an external supplier and from an open-source design. The material is characterized by high impact strength, good resistance to greases, oils, fuels, hydraulic fluids, salt solutions and solvents. It can be used in a large temperature range. The PA12 filament is difficult to print, recommended for experienced users of 3D printers.

Filament ABS+ - thermoplastic product in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. ABS+ is easily machined such as grinding, drilling or smoothing, the material is soluble in acetone.

PolyPlus™ PLA is a premium PLA designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PLA - thermoplastic polyester in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. PLA is a biodegradable material, produced from renewable natural resources. It is dedicated primarily to amateurs due to trouble-free use.

Filament produced in Poland.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament produced on request marwiol by Polish manufacturer 3D Kordo.

There is practically no shrinkage (no warp effect).

The softening temperature is at approx. 45 °C.

PLA is a hard material that is bendable like ABS.

This Poly Lactic Acid is not brittle or fragile and convinces by its high hardiness and stiffness.

SILK filament was created from a combination of PLA and PET-G materials, to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk filament exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.

The filament PLA is a biodegradable plastic due to its natural origin (corn, sugarcane or potatoes). In addition, it is one of the easiest to print
materials in the 3D printing world.

Print easily a lot of models with higher printing speed than other materials. You will not have pieces with warping as this material does not have contractions, so you will be able to print with high-resolution models with a good surface finish.
Print your designs in many superb colours!