Featured products

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

If you need a more convertible filament, you can choose Philament Gypsum. It contains twice as much mineral as Philament Model, which allows an easier surface treatment.

Philament PLA is a composite material that contains several ingredients: pigment, lubricant, filler, impact modifier. The modification resulted “softer” filament with easy to 3D printing characteristics even at a lower temperature. The lower shrinkage compared to the most used filament will not deform, accordingly do not need the printed bed. However, recommended with a temperature of 30-60°C. The strong quality control from raw material to the Philament roundness and very precise diameter tolerances resulted from excellent 3D printing quality. Philament can be used with all common desktop 3D printers with FDM/FFF technology. Printing with Philament is easy and smooth.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Smarfil PLA is a high-quality PLA filament by Spanish manufacturer Smart Materials 3D. PLA filament is biodegradable and compostable material obtained through the starch extracted from corn, beet, or sugar cane. PLA filament is the material most used in the 3D printing industry. It was designed to be easy to print and it is suitable for most of the printers in the market. Smarfil PLA filament during use does not generate harmful gases, so it is perfect for printing in inner spaces or with poor ventilation.

Smart Materials 3D Dental HD photopolymer resin for 3D printing is a completely matte beige photopolymer resin for 3D printing developed for the dental sector. This resin for 3D printing has great dimensional stability and low shrinkage allowing making pieces with great precision. The matte finish enhances all the details of the model allowing a perfect visualization of cuts and markers. Smart Materials 3D Dental HD photopolymer resin for 3D printing provides high definition to the piece by accentuating its depth. Dimensionally stable and accurate, it is perfect to produce dental modules, thermoforming and aligners.

The material consists of two parts: an elastomer that is responsible for the rubber-like feel and material property, and a water-soluble ingredient. After printing, the object is placed in water whereby after one and four days, leaving behind the elastomer, and thus the soft porous object.

Rinse in water:
- print thin walls and heep filling rate as low as possible to shorten the time for rinsing
- gently rinse with water, hot water and patience provides good results
- you can clearly notice the effect and that the material is getting softer after one day
- after three days every PVA should be gone
- stir and change the water often
- you can reduce the rinsing time by using an ultrasonic cleaner
- remaining water can be removed from the object quickly by using a clothes dryer
- repeatedly rinsing: fresh water → Wait → Dryer → fresh water → Wait → Dryer
- PVA residues feel greasy, like sugar syrup
- remove all PVA residues

Poro-Lay are experimental filaments for experimental and experienced user. Help for processing and a great ideas for new 3D objects can be found in the prestigious forums.

The components of Poro-Lay are harmless and food safe. The water-soluble component is even biocompatible. However, we strongly advise not to eat the material. 

Poro-Lay is best stored dry. If the material absorbed moisture after some time, the filament can be dried in an oven at about 80 ° C for four to five hours. We recommend drying the filament before the very first print.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PA6 filament is characterized by very good mechanical strength, flexibility and excellent adhesion of individual layers. Tarfuse PA6 is a filament dedicated to printing functional and technical parts in such industries as automotive, mechanical engineering, railways, construction industry, and electrical engineering.

Plastic filament out of PET 1,75 mm in brown, green, purple. 

Kit contains five meters for each colour of filament.

Filament produced in the Czech Republic.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.