Accessories

3DLAC is an excellent spray-on bed adhesive that works well with adhering ABS, and PLA to the glass build plate without any peeling or curling off the glass while printing. It is very easy to apply and requires no preparation before printing unlike using tape. Simply spray on your glass build plate and you are ready to print within seconds!

3DLac Plus spray adhesive in a pump spray bottle based on thermoplastic copolymers for 3D printing.

Properties

• Ultrafast drying
• Simple application
• Easy cleaning with water
• Good adhesive for ABS, PLA, PETG ...

COROPad is a specialistic adhesive pad for 3D printers operating in FDM/FFF technology. It creates a perfect printing surface for most of the currently available filaments. COROPad ensures correct adhesive first layer, which prevents the printouts from detaching. It works great with most commonly used materials, such as ABS or PLA. High-temperature glue and the correct stiffness of the pad allow a very simple implementation. All that needs to be done is to decrease the bed and stick the pad, all in a total of 30 seconds.

COROPad is a specialistic adhesive pad for 3D printers operating in FDM/FFF technology. It creates a perfect printing surface for most of the currently available filaments. COROPad ensures correct adhesive first layer, which prevents the printouts from detaching. It works great with most commonly used materials, such as ABS or PLA. High-temperature glue and the correct stiffness of the pad allow a very simple implementation. All that needs to be done is to decrease the bed and stick the pad, all in a total of 30 seconds.

D-Limonene is the perfect solvent for anyone wanting to print support heavy multi extrusion 3D models who do not want to spend hours having to manually remove, non-dissolvable, support structures. The D-limonene will initially soften the hips and over time dissolve the material completely leaving nothing but a sticky sludge that is easy to clean off with a brush and hot water.

D-Limonene is the perfect solvent for anyone wanting to print support heavy multi extrusion 3D models who do not want to spend hours having to manually remove, non-dissolvable, support structures. The D-limonene will initially soften the hips and over time dissolve the material completely leaving nothing but a sticky sludge that is easy to clean off with a brush and hot water.

PolyBox™ is a filament storage box that allows you to store your materials in their optimum printing environment while still being able to print with them. PolyBox™ features a thermo-hygrometer to monitor your filaments inside the box. The humidity is regulated by large desiccant bags which absorb moisture from the air inside the PolyBox™, specifically designed for hygroscopic materials such as PolySmooth™, PVA or Nylon. The PolyBox™ can house two 1kg spools simultaneously or one 3kg spool and is compatible with both 1.75mm and 2.85mm filament diameters.

Cleaning filament helps you maintain your 3D printer and increases the operating time of your extruder. It is perfect to eliminate small seals when you change colours or materials.