3DLAC is an excellent spray-on bed adhesive that works well with adhering ABS, and PLA to the glass build plate without any peeling or curling off the glass while printing. It is very easy to apply and requires no preparation before printing unlike using tape. Simply spray on your glass build plate and you are ready to print within seconds!

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of light green PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Filament produced on request marwiol by Polish manufacturer 3D Kordo.

Filament PETG - a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open-source structures before use. PETG is material friendly for beginners, the material is available in covering and transparent colours.

Lattice PC filament is a medical-grade polymer of high-quality Polycarbonate [PC]. This transparent filament with blue reflections, solid and resistant, will make 3D parts with applications in contact with the skin.

Polycarbonate is an amorphous thermoplastic known for its very high strength and resistance to high temperatures. The PC filament is made from granules complying with ISO 10993-5 certification for skin contact, it is also autoclavable and can be used in the operating room for guided surgeries. This filament is generally used for printing 3D parts such as surgical guides and cutting guides, or medical instruments.

The material consists of two parts: an elastomer that is responsible for the rubber-like feel and material property, and a water-soluble ingredient. After printing, the object is placed in water whereby after one and four days, leaving behind the elastomer, and thus the soft porous object.

Rinse in water:
- print thin walls and heep filling rate as low as possible to shorten the time for rinsing
- gently rinse with water, hot water and patience provides good results
- you can clearly notice the effect and that the material is getting softer after one day
- after three days every PVA should be gone
- stir and change the water often
- you can reduce the rinsing time by using an ultrasonic cleaner
- remaining water can be removed from the object quickly by using a clothes dryer
- repeatedly rinsing: fresh water → Wait → Dryer → fresh water → Wait → Dryer
- PVA residues feel greasy, like sugar syrup
- remove all PVA residues

Poro-Lay are experimental filaments for experimental and experienced user. Help for processing and a great ideas for new 3D objects can be found in the prestigious forums.

The components of Poro-Lay are harmless and food safe. The water-soluble component is even biocompatible. However, we strongly advise not to eat the material. 

Poro-Lay is best stored dry. If the material absorbed moisture after some time, the filament can be dried in an oven at about 80 ° C for four to five hours. We recommend drying the filament before the very first print.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PA6 filament is characterized by very good mechanical strength, flexibility and excellent adhesion of individual layers. Tarfuse PA6 is a filament dedicated to printing functional and technical parts in such industries as automotive, mechanical engineering, railways, construction industry, and electrical engineering.

PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight.

PolyLite™ LW-PLA is not an active foaming filament, which means it will not foam when extruded from the nozzle depending on the temperature. PolyLite™ LW-PLA is already pre-foamed.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.