Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

Polymaker PolyPlus PLA is a premium PLA designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyPlus PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

.

PLA filament was produced on request by marwiol.com by Polish manufacturer 3D Kordo. Our 3D printing filament combines high quality at an affordable price.

3D printing filament wound on a spool and vacuum packed. The spool contains 1 kg of black PLA filament 1,75 mm.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of red PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of brown PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

The set contains 6 spools 0,33 kg of PET-G filament in colours: white, bright yellow, red, bright green, blue and black.

PET-G is fairly stiff, strong and impact-resistant. These characteristics make the material highly suitable for lightweight products.

Polymaker dual PolyTerra Camouflage is a duality of filament colours: half of the fibre cross-section is dark green, and the other half is brown. As a result, the printed element has effective shading.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PA6 AM filament is a PA6 nylon filament with antibacterial properties, in addition to printing hobby, demonstration and prototype elements. Tarfuse® PA AM is approved for contact with food in accordance with Regulation (EU) 10/2011 and subsequent amendments.

Details in 3D technology, i.e. as well as prototypes and functional details due to the fact that the layered function can affect the environment for the development of bacteria and fungi. Even after a basic wash often no extra detail can be obtained, this is critical for children's hobby prints. Thanks to the elements made of antibacterial filament, the proliferation of bacteria and fungi is therefore reduced, and the risk of spreading germs among users is reduced.

Filament for 3D printing PETG of the Polish manufacturer 3DKordo in blue matte. The modified polymer composition allows you to achieve a beautiful matte finish of the printed element.

PETG filament is a thermoplastic polymer from a group of polyesters in a utility version, intended for 3D printing using the FFF method. PETG filament, also known as polyethene terephthalate, is a copolyester known for its conductivity and ease of use. PETG filament has the stiffness and mechanical properties of ABS filament but is as easy to print as PLA filament.
The filament for printing PETG from the manufacturer 3DKordo is wound on a spool, it appeared in a vacuum.