Spectrum PET-G Glow in the Dark is a PET-G-based filament blended with a concentrated phosphorescent pigment which causes the phosphorescence effect. Accordingly, they will emit their light once the printed items are exposed to an external light source. The material has all the typical characteristics of the pure PET-G. The added pigment has a neutral impact on the material’s properties

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of dark steel PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight.

PolyLite™ LW-PLA is not an active foaming filament, which means it will not foam when extruded from the nozzle depending on the temperature. PolyLite™ LW-PLA is already pre-foamed.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of green with metallic sheen PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Plastic filament out of PLA 1,75 mm in white, silver, black. 

Kit contains five meters for each colour of filament.

Filament produced in the Czech Republic.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Tarfuse® PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. The PLA with glitter filament gets a unique and shiny finish in your pieces. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.

PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight.

PolyLite™ LW-PLA is not an active foaming filament, which means it will not foam when extruded from the nozzle depending on the temperature. PolyLite™ LW-PLA is already pre-foamed.

The LayFomm 40 is another 3D printing filament created by Kai Parthy, the creator of such filaments as LayWood, Lay Brick and Reflect-o-Lay. LayFomm 40 filament is a 3D printing material with two components: an elastomer similar to rubber (TPU) and a water-soluble (PVA). After printing, place the item in water. After one to four days water-soluble (PVA) component dissolves. As a result, we received a very porous and flexible object that looks like foam. LayFomm 40 is slightly softer than LayFomm 60.