PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight.

PolyLite™ LW-PLA is not an active foaming filament, which means it will not foam when extruded from the nozzle depending on the temperature. PolyLite™ LW-PLA is already pre-foamed.

Polymaker PolyLite PLA filament 1,75 mm, that changes colour from green to lime under the influence of temperature. Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

Smarfil PLA is a high-quality PLA filament by Spanish manufacturer Smart Materials 3D. PLA filament is biodegradable and compostable material obtained through the starch extracted from corn, beet, or sugar cane. PLA filament is the material most used in the 3D printing industry. It was designed to be easy to print and it is suitable for most of the printers in the market. Smarfil PLA filament during use does not generate harmful gases, so it is perfect for printing in inner spaces or with poor ventilation.

PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight.

PolyLite™ LW-PLA is not an active foaming filament, which means it will not foam when extruded from the nozzle depending on the temperature. PolyLite™ LW-PLA is already pre-foamed.

Smarfil PLA is a high-quality PLA filament by Spanish manufacturer Smart Materials 3D. The Smartfil PLA Skin range is a series of PLA filaments with skin colour tones, these are especially indicated for applications of anatomical models, medical splints and orthoses in general, as well as 3d modelling and prototyping to achieve the most precise skin hue possible.

Polymaker PolyLite PETG is an affordable PETG filament with balanced mechanical properties and ease of printing. PolyLite PETG is just as easy to print as PolyLite PLA while offering an additional 20˚C heat resistance and more durability. This lends PolyLite PETG to more functional applications where PLA would lack the durability or heat resistance such as lighting fixtures, vibrational parts or more functional product design prototypes.

MoldLay filament is a wax material for 3D printing, designed to create casting moulds for castings using the lost wax method. The printing process of MoldLay filament is similar to PLA filament (printing temperature up to 170-180°C). The difference with the standard 3D printing filaments appears after heating the printed form to a temperature of 270°C. At this temperature, MoldLay transforms into a low-viscosity fluid, allowing easy mould removal of the casting mould.

Polymaker PolyMide is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide filaments deliver engineering properties intrinsic to Nylon and ease of printing.

Polymaker PolyMide PA6-GF is a glass fibre-reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing layer adhesion.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.