Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA6 CF10 filament is polyamide 6 (PA6) reinforced with staple carbon fibre (10%). Thanks to this, the material has antistatic and electrically conductive properties. It is perfect for printing elements with high strength requirements. Printed elements are characterised by reduced water absorption.

Sparkly black PETG 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Recommended printing temperature 220-250 °C

Heated bed temperature - 70-80°C

You can print at 90mm/s. 

Dimensions of the spool:

- Diameter: 20,0 cm,
- Height: 7,0 cm,
- Hole diameter: 5,2 cm. 

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA M filament, made of polyamide 6 (PA6), is characterized by very good mechanical strength and modified properties tribological, which causes a decrease in the coefficient of friction.

Polymaker Panchroma CoPE is a copolyester-based 3D printing filament designed for effortless printing and an exceptionally high-quality surface finish. Its innovative formula enhances bridging and overhang performance while enabling reliable high-speed printing at speeds of up to 400mm/s.

Polymaker PolyMide CoPA filament is a copolymer of Nylon 6 and Nylon 6,6 combining high tensile strength properties from Nylon 6 with heat resistance properties from Nylon 6.6. Warp-Free technology provides ease of printing by slowing down the crystallization allowing CoPA to be easily printed on open-bed printers. Displaying outstanding mechanical and thermal properties, CoPA is suited for parts in demanding environments. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.

Polymaker PolyLite PLA contains an additive thanks to which the printed element glows with its own, in this case, blue, light after prior exposure to light from the outside. Polymaker PolyLite PLA  is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PETG FR is a flame-retardant material in class V0 UL94. It is made of high-quality PETG modified with cyclohexanedimethanol. This material is characterised by high mechanical strength, good adhesion of individual layers, and low linear shrinkage. It is characterised by high ease of printing at the level of unmodified PETG. It does not contain halogen derivatives, red phosphorus or asbestos

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA ESD filament is made of polyamide 6 (PA6) with the addition of ground carbon, thanks to which it has antistatic properties. This feature of PA ESD filament makes this material suitable for printing protective elements of electronic components.

Polymaker PolyPlus PLA is a premium PLA designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyPlus PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

.