PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

The LayFomm 40 is another 3D printing filament created by Kai Parthy, the creator of such filaments as LayWood, Lay Brick and Reflect-o-Lay. LayFomm 40 filament is a 3D printing material with two components: an elastomer similar to rubber (TPU) and a water-soluble (PVA). After printing, place the item in water. After one to four days water-soluble (PVA) component dissolves. As a result, we received a very porous and flexible object that looks like foam. LayFomm 40 is slightly softer than LayFomm 60.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of bright yellow PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Smartfil PVA or polyvinyl alcohol is a water-soluble filament used as support material in 3D printing. It is especially recommended to use for PLA pieces to reach those points where the support structure is complex or inaccessible. Later, it can be removed by putting the piece in water, It is also a biodegradable filament, non-toxic and odourless.

The highest quality filament for 3D printing Everfil Nylon PA12-CF was made by a Polish manufacturer, 3D Kordo. Everfil PA12-CF is a carbon fibre-reinforced PA12 (Nylon 12) filament. Thanks to the low moisture sensitivity of PA12, this product features outstanding mechanical and thermal properties it is ideal to create manufacturing tools.

SILK filament was created from a combination of PLA and PET-G materials, to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk filament exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.
The SILK 3D printing filament by recognized Polish manufacturer, Devil Design, is an ideal filament for arts and crafts projects, vases and other 3D printed products that can have unique silky properties.
SILK filament is an easy-to-print, non-clogging, natural and non-toxic material for 3D printing. The use of SILK filament is harmless to the user and the environment. SILK filament is ideal for indoor use.

The material consists of two parts: an elastomer that is responsible for the rubber-like feel and material property, and a water-soluble ingredient. After printing, the object is placed in water whereby after one and four days, leaving behind the elastomer, and thus the soft porous object.

Rinse in water:
- print thin walls and heep filling rate as low as possible to shorten the time for rinsing
- gently rinse with water, hot water and patience provides good results
- you can clearly notice the effect and that the material is getting softer after one day
- after three days every PVA should be gone
- stir and change the water often
- you can reduce the rinsing time by using an ultrasonic cleaner
- remaining water can be removed from the object quickly by using a clothes dryer
- repeatedly rinsing: fresh water → Wait → Dryer → fresh water → Wait → Dryer
- PVA residues feel greasy, like sugar syrup
- remove all PVA residues

Poro-Lay are experimental filaments for experimental and experienced user. Help for processing and a great ideas for new 3D objects can be found in the prestigious forums.

The components of Poro-Lay are harmless and food safe. The water-soluble component is even biocompatible. However, we strongly advise not to eat the material. 

Poro-Lay is best stored dry. If the material absorbed moisture after some time, the filament can be dried in an oven at about 80 ° C for four to five hours. We recommend drying the filament before the very first print.

3DLac Plus spray is an adhesive in a pump spray bottle based on thermoplastic copolymers for 3D printing. 3DLac Plus is ultrafast drying, simple application, easy to clean with water, and a good adhesive for ABS, PLA, PETG, and other 3D printing filaments. 

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of graystone PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.