LayFomm 60 filament, 2,85 mm, 0,25 kg
The LayFomm 60 is another 3D printing filament created by Kai Parthy, the creator of such filaments as LayWood, Lay Brick and Reflect-o-Lay. LayFomm 60 filament is a 3D printing material with two components: an elastomer similar to rubber (TPU) and a water-soluble (PVA). After printing, place the item in water. After one to four days water-soluble (PVA) component dissolves. As a result, we received a very porous and flexible object that looks like foam. LayFomm 60 is slightly firmer than LayFomm 40.
Shipment date:: 24 hours
Devil Design SILK filament, 1,75 mm, light red, 0,33 kg
SILK filament was created from a combination of PLA and PET-G materials, to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk filament exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.
Shipment date:: 24 hours
Everfil PETG filament 1,75 mm, anthracite grey, spool 1 kg
Filament produced by Polish manufacturer 3D Kordo.
Filament PETG - a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum-packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open-source structures before use. PETG is a material friendly for beginners; the material is available in covering and transparent colours.
Shipment date:: 24 hours
Devil Design PETG filament 1,75 mm, galaxy (sparkly) black, 0,33 kg
Sparkly black PETG 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.
Recommended printing temperature 220-250 °C
Heated bed temperature - 70-80°C
You can print at 90mm/s.
Dimensions of the spool:
- Diameter: 20,0 cm,
- Height: 7,0 cm,
- Hole diameter: 5,2 cm.
Shipment date:: 24 hours
PETG filament 1,75 mm, Tarfuse Magic Pearl Violet 1 kg
Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
Shipment date:: 24 hours
Spectrum PETG FR V0 filament 1,75 mm NATURAL 0,75kg
Spectrum PETG FR V0 is a new halogen-free, flame-resistant 3D printing material based on the ever-popular PETG. The filament is designed according to UL 94 V0* flammability rating requirements, meaning that the vertical burning of the filament or printed part does not exceed 10 seconds. Most typical plastics have poor flame resistance, which is why the Spectrum PETG FR V0 filament was developed with flame-resistant or self-extinguishing properties to provide a high level of safety in everyday or working environments. The applied modifications do not affect the printability of the filament, which helps maintain the classic properties of PETG, i.e. simplicity and efficiency of printing, with very low shrinkage and relatively high tensile strength.
Shipment date:: 24 hours
Tarfuse PA6 LM (laser marking ) black filament 1,75 mm 0,5 kg
Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.
The Tarfuse® PA LM filament, made of polyamide 6 (PA6), has excellent mechanical properties as well as thermal and chemical resistance Contains an additive for laser marking of the printed part using the Nd/YAG laser.
Shipment date:: 24 hours
Polymaker Panchroma CoPE filament 1,75 mm, blue, 1 kg
Polymaker Panchroma CoPE is a copolyester-based 3D printing filament designed for effortless printing and an exceptionally high-quality surface finish. Its innovative formula enhances bridging and overhang performance while enabling reliable high-speed printing at speeds of up to 400mm/s.
Shipment date:: 24 hours
Devil Design PETG filament 1,75 mm, bright yellow, 1 kg
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.
Shipment date:: 24 hours