Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PA6 filament is characterized by very good mechanical strength, flexibility and excellent adhesion of individual layers. Tarfuse PA6 is a filament dedicated to printing functional and technical parts in such industries as automotive, mechanical engineering, railways, construction industry, and electrical engineering.

Temperature Range:
240 – 280 °C

Recommended 3D printing temperature:
250 – 270 °C

Recommended 3D print speed:
30 – 90 mm/s

Recommended Heated bed:
If equipped set Heating Bed to 80 °C

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

The material consists of two parts: an elastomer that is responsible for the rubber-like feel and material property, and a water-soluble ingredient. After printing, the object is placed in water whereby after one and four days, leaving behind the elastomer, and thus the soft porous object.

Rinse in water:
- print thin walls and heep filling rate as low as possible to shorten the time for rinsing
- gently rinse with water, hot water and patience provides good results
- you can clearly notice the effect and that the material is getting softer after one day
- after three days every PVA should be gone
- stir and change the water often
- you can reduce the rinsing time by using an ultrasonic cleaner
- remaining water can be removed from the object quickly by using a clothes dryer
- repeatedly rinsing: fresh water → Wait → Dryer → fresh water → Wait → Dryer
- PVA residues feel greasy, like sugar syrup
- remove all PVA residues

Poro-Lay are experimental filaments for experimental and experienced user. Help for processing and a great ideas for new 3D objects can be found in the prestigious forums.

The components of Poro-Lay are harmless and food safe. The water-soluble component is even biocompatible. However, we strongly advise not to eat the material. 

Poro-Lay is best stored dry. If the material absorbed moisture after some time, the filament can be dried in an oven at about 80 ° C for four to five hours. We recommend drying the filament before the very first print.

Sparkly blue PLA 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.

Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of beige PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Polymaker PolyLite Silk PLA 3D printing filament through a special modification of PLA filament gives a glossy outstanding surface finish that produces excellent 3D printed models. This filament is easy to print like a standard PLA filament. It is a natural material, biodegradable and eco-friendly, with no harm to the user and environment.

Printing and Drying Settings:

Smarfil PLA is a high-quality PLA filament by Spanish manufacturer Smart Materials 3D. The Smartfil PLA Skin range is a series of PLA filaments with skin colour tones, these are especially indicated for applications of anatomical models, medical splints and orthoses in general, as well as 3d modelling and prototyping to achieve the most precise skin hue possible.