PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Plastic filament out of PLA 2,85 mm in black, white, yellow, orange. 

Kit contains 25 sticks for the 3D pen.

Filament produced in the Czech Republic.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of beige PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

The material consists of two parts: an elastomer that is responsible for the rubber-like feel and material property, and a water-soluble ingredient. After printing, the object is placed in water whereby after one and four days, leaving behind the elastomer, and thus the soft porous object.

Rinse in water:
- print thin walls and heep filling rate as low as possible to shorten the time for rinsing
- gently rinse with water, hot water and patience provides good results
- you can clearly notice the effect and that the material is getting softer after one day
- after three days every PVA should be gone
- stir and change the water often
- you can reduce the rinsing time by using an ultrasonic cleaner
- remaining water can be removed from the object quickly by using a clothes dryer
- repeatedly rinsing: fresh water → Wait → Dryer → fresh water → Wait → Dryer
- PVA residues feel greasy, like sugar syrup
- remove all PVA residues

Poro-Lay are experimental filaments for experimental and experienced user. Help for processing and a great ideas for new 3D objects can be found in the prestigious forums.

The components of Poro-Lay are harmless and food safe. The water-soluble component is even biocompatible. However, we strongly advise not to eat the material. 

Poro-Lay is best stored dry. If the material absorbed moisture after some time, the filament can be dried in an oven at about 80 ° C for four to five hours. We recommend drying the filament before the very first print.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of white PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA HS BK filament, made of polyamide 6 (PA6), is characterized by very good mechanical strength and contains a thermal stabilizer that enables continuous operation, the details of which in the reinforcement reach 130°C.

Polymaker PolyMide CoPA filament is a copolymer of Nylon 6 and Nylon 6,6 combining high tensile strength properties from Nylon 6 with heat resistance properties from Nylon 6.6. Warp-Free technology provides ease of printing by slowing down the crystallization allowing CoPA to be easily printed on open-bed printers. Displaying outstanding mechanical and thermal properties, CoPA is suited for parts in demanding environments. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.