Is a filament for 3D printing PET-based that incorporates carbon fibre. Thanks to this, we maintain the great qualities of PET and increase its mechanical and thermal properties. Stability and the ease of printing make this material fantastic to print working pieces with a great finish. 

• High mechanical and thermal resistance.
• Great chemical resistance.
• Low moisture absorption.
• Good dimensional stability.
• Perfect surface finish.

Tarfuse® Simply PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of copper PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PLA filament was produced on request by marwiol.com by Polish manufacturer 3D Kordo. Our 3D printing filament combines high quality at an affordable price.

3D printing filament wound on a spool and vacuum packed. The spool contains 1 kg of black PLA filament 1,75 mm.

Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

PLA filament was produced on request by marwiol.com by Polish manufacturer 3D Kordo. Our 3D printing filament combines high quality at an affordable price.

3D printing filament wound on a spool and vacuum packed. The spool contains 1 kg of magenta PLA filament 1,75 mm.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

PET-G is fairly stiff, strong and impact-resistant. These characteristics make the material highly suitable for lightweight products. 

Recommended printing temperature 230-260 °C

Heated bed temperature - 70°C

You can print at 90mm/s. Similar to print with PLA

Smarfil PLA is a high-quality PLA filament by Spanish manufacturer Smart Materials 3D. The Smartfil PLA Skin range is a series of PLA filaments with skin colour tones, these are especially indicated for applications of anatomical models, medical splints and orthoses in general, as well as 3d modelling and prototyping to achieve the most precise skin hue possible.