Devil Design SILK filament, 1,75 mm, violet, 1 kg
SILK filament was created from a combination of PLA and PET-G materials, to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk filament exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.
The SILK 3D printing filament by recognized Polish manufacturer, Devil Design, is an ideal filament for arts and crafts projects, vases and other 3D printed products that can have unique silky properties.
SILK filament is an easy-to-print, non-clogging, natural and non-toxic material for 3D printing. The use of SILK filament is harmless to the user and the environment. SILK filament is ideal for indoor use.
Shipment date:: 24 hours
Gel-Lay Filament 1,75 mm, coil 250 g
Gel-Lay is another 3D printing filament created by Kai Parthy, the creator of such filaments as LayWood, Lay Brick and Reflect-o-Lay. Gel-Lay filament is a 3D printing material with two components: an elastomer similar to rubber (TPU) and a water-soluble (PVA). After printing, place the item in water. After one to four days water-soluble (PVA) component dissolves. As a result, we received a soft, porous item. Importantly, the pores are not visible to the naked eye. The Gel-Lay filament is characterized by negligible deformation during printing.
Shipment date:: 24 hours
Devil Design ASA filament 1,75 mm, dark gray, 1 kg
ASA (Acrylonitrile Styrene Acrylate) is a UV-resistant weatherable polymer. Our ASA has a low-gloss matte finish that makes it a perfect filament for technical prints - especially when you don't want the high-gloss surface finish often associated with many other 3D printing materials such as ABS, PETG, or PLA. ASA's UV stability makes it an ideal material for outdoor applications that will experience intense exposure to the sun and weather. ASA's exceptional mechanical and thermal properties - coupled with excellent UV stability - is why this resin is used in the Auto, Marine, and RV industries for exterior applications such as mirror housings, cowl covers, radiator grills, and sensor housings.
Shipment date:: 24 hours
Polymaker PolyLite Silk PLA filament 1,75 mm, magenta, 1 kg
Polymaker PolyLite Silk PLA 3D printing filament through a special modification of PLA filament gives a glossy outstanding surface finish that produces excellent 3D printed models. This filament is easy to print like a standard PLA filament. It is a natural material, biodegradable and eco-friendly, with no harm to the user and environment.
Printing and Drying Settings:
Printing Temperature: 190˚C - 230˚C
Bed Temperature: 25˚C - 60˚C
Printing Speed: 40mm/s - 60mm/s
Fan: ON
Shipment date:: 24 hours
Polymaker PolyLite LW-PLA filament 1,75 mm, white 0,8 kg
PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight.
PolyLite™ LW-PLA is not an active foaming filament, which means it will not foam when extruded from the nozzle depending on the temperature. PolyLite™ LW-PLA is already pre-foamed.
Shipment date:: 24 hours
Tarfuse Simply PLA green filament 1,75 mm, 1 kg
Tarfuse® Simply PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.
Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.
Shipment date:: 24 hours
Everfil PETG filament 1,75 mm, black grey, spool 1 kg
Filament produced on request marwiol by Polish manufacturer 3D Kordo.
Filament PETG - a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open-source structures before use. PETG is material friendly for beginners, the material is available in covering and transparent colours.
Shipment date:: 24 hours
Devil Design PETG filament 1,75 mm, bright orange, 1 kg
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.
Shipment date:: 24 hours
Polymaker PolyMax PLA filament 1,75 mm, blue, spool 0,75 kg
Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.
Regular PLA is a very brittle material, which greatly limits its range of applications. Polymaker PolyMax PLA was designed to change this. Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.
Shipment date:: 24 hours