PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 0,33 kg of blue PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of red PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA HS BK filament, made of polyamide 6 (PA6), is characterized by very good mechanical strength and contains a thermal stabilizer that enables continuous operation, the details of which in the reinforcement reach 130°C.

PolySupport™ is a material designed to solve one of the most intimidating problems in desktop FDM/FFF 3D printing: support. PolySupport™ generates support structures that can be easily removed by hand.

PolySupport™ can be used on both dual and single-extrusion printers. It can be used either as a dedicated support material (dual-extrusion) or as both the modelling and support material (single-extrusion). In both cases, the support structure can be easily removed. So no matter what printer you may have you can rely on PolySupport™ to support your creations.

Polymaker Panchroma CoPE is a copolyester-based 3D printing filament designed for effortless printing and an exceptionally high-quality surface finish. Its innovative formula enhances bridging and overhang performance while enabling reliable high-speed printing at speeds of up to 400mm/s.

Sparkly blue PETG 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Spectrum PET-G Carbon is a modified, PETG-based filament blended with carbon fibres which contributes to a considerably higher rigidity, hardness and tensile resistance while retaining low shrinkage and very good adhesion to build platforms typical for pure PETG. The 10% addition of carbon fibres enables to obtaining of matte surfaces of printed items, which greatly improves the aesthetic properties of printed items.

The Devil Design StartPack PLA 1,75 mm is a set of 3D printing filaments  PLA 1.75 mm from a recognized Polish manufacturer, Devil Design, witch contains 6 spools of 0.33 kg each of 3D printing filament in "sweet" shades of red, pink and purple.

PLA Devil Design Start Pack is the perfect option to start your 3D printing adventure.

Polymaker PolyPlus PLA is a premium PLA designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyPlus PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!