Sparkly blue PLA 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.

Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.

Regular PLA is a very brittle material, which greatly limits its range of applications.  Polymaker PolyMax PLA was designed to change this.  Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.

Tarfuse® PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. The pearl PLA filament gets unique and shiny with a pearly sheen finish in your pieces. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.

We are pleased to introduce the PC 275 filament, which is an excellent choice for all 3D printing enthusiasts and professionals looking for a material with exceptional properties. Spectrum PC 275 is a professional, high-class filament characterized by unrivalled features and parameters.

The modification of the Spectrum PC 275 filament composition aimed to reduce the high shrinkage typical of PC-based materials and to increase adhesion between layers. Thanks to this, PC 275 filament is characterized by excellent stability during the 3D printing process, which translates into excellent precision and accuracy of the printed objects. The filament also has improved flow parameters allowing printing at high speeds.

Spectrum PET-G Carbon is a modified, PETG-based filament blended with carbon fibres which contributes to a considerably higher rigidity, hardness and tensile resistance while retaining low shrinkage and very good adhesion to build platforms typical for pure PETG. The 10% addition of carbon fibres enables to obtaining of matte surfaces of printed items, which greatly improves the aesthetic properties of printed items.

Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.

Regular PLA is a very brittle material, which greatly limits its range of applications.  Polymaker PolyMax PLA was designed to change this.  Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.

INNOVATEFIL® PP SUPPORT, is a support material for PP that is unique in the market, knowing that it is a highly requested need for all PP users and that it will facilitate the production of complex parts, especially in the industrial sector which is constantly on the lookout for cutting-edge products and in need of an efficiency and effectiveness boost in their production and factory lines.

One of the numerous advantages of INNOVATEFIL® PP SUPPORT is how simple it is to use. This is because INNOVATEFIL® PP SUPPORT is a BREAKAWAY material, which makes it very simple to remove it from the finished product and eliminates the need for any form of dilution. This, in addition to producing a flawless finish in a shorter amount of time, represents a significant reduction in post-processing work and efficiency never previously attained by any material in the industry.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

D-Limonene is the perfect solvent for anyone wanting to print support heavy multi extrusion 3D models who do not want to spend hours having to manually remove, non-dissolvable, support structures. The D-limonene will initially soften the hips and over time dissolve the material completely leaving nothing but a sticky sludge that is easy to clean off with a brush and hot water.