Tarfuse PETG AM (antibacterial) natural filament 1,75 mm, 0,5 kg
Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.
The Tarfuse PETG AM filament is a PETG filament with antibacterial properties, in addition to printing hobby, demonstration and prototype elements. Tarfuse® PA AM is approved for contact with food in accordance with Regulation (EU) 10/2011 and subsequent amendments.
Details in 3D technology, i.e. as well as prototypes and functional details due to the fact that the layered function can affect the environment for the development of bacteria and fungi. Even after a basic wash often no extra detail can be obtained, this is critical for children's hobby prints. Thanks to the elements made of antibacterial filament, the proliferation of bacteria and fungi is therefore reduced, and the risk of spreading germs among users is reduced.
Shipment date:: 24 hours
Spectrum PETG Premium filament 1,75 mm, CHOCOLATE BROWN 1kg (RAL 8016)
Spectrum PETG Premium is made by a Polish manufacturer Spectrum Filaments. It is the second most popular material for desktop 3D printing. A major advantage provided by Spectrum PETG Premium is the virtually zero shrinkage rate and low absorption of moisture as compared to other thermoplastics used for FDM/FFF 3D printing. Items manufactured with PETG maintain stable properties over a long life. Spectrum PETG Premium combines the advantages of PLA and ABS. It also provides nearly trouble-free printing and exceptional adhesion between layers.
Shipment date:: 24 hours
Devil Design PLA filament 1,75 mm, grey, 2 kg
PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of grey PLA filament.
PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.
Shipment date:: 24 hours
Devil Design PLA filament 1,75 mm, galaxy (sparkly) black, 1 kg
Sparkly black PLA 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.
Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg PLA filament.
PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.
Shipment date:: 24 hours
Polymaker PolyPlus PLA filament 1,75 mm, translucent yellow, spool 0,75 kg
PolyPlus™ PLA is a premium PLA designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.
Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, PolyPlus™ PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle-jams!
Shipment date:: 24 hours
PET filament, 2,85 mm, white, spool 1 kg
PET-G is fairly stiff, strong and impact-resistant. These characteristics make the material highly suitable for lightweight products.
Recommended printing temperature 230-260 °C
Heated bed temperature - 70°C
You can print at 90mm/s. Similar to print with PLA
Shipment date:: 24 hours
Devil Design SILK filament, 1,75 mm, yellow, 0,33 kg
SILK filament was created from a combination of PLA and PET-G materials, to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk filament exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.
Shipment date:: 24 hours
Polymaker PolyFlex TPU95 filament 2,85 mm, yellow 0,75 kg
PolyFlex™ is a highly flexible yet easy to print 3D printing material. Featuring good elasticity and a large strain-to-failure, PolyFlex™ opens up a completely new realm of applications. jams.
PolyFlex™ is designed to be compatible with almost all desktop FDM/FFF printers and requires no hardware modification. Not only does it print smoothly but adheres well to a large variety of surfaces with no need for a heated build plate leaving you to think about nothing other than what model your going to print.
Shipment date:: 24 hours
NylonForce Glass filament 1,75 mm black 0,5 kg
Filament composed of nylon charged with glass fibres (approximately 18% by weight), allows precise prints and it’s a great choice for technical and mechanical purposes.
Very easy to print, it’s compatible with all machines and with a standard nozzle (0.4 mm) it can be printed at a low temperature (240/245°C).
Shipment date:: 24 hours