Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.

Regular PLA is a very brittle material, which greatly limits its range of applications.  Polymaker PolyMax PLA was designed to change this.  Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.

INNOVATEFIL® PP SUPPORT, is a support material for PP that is unique in the market, knowing that it is a highly requested need for all PP users and that it will facilitate the production of complex parts, especially in the industrial sector which is constantly on the lookout for cutting-edge products and in need of an efficiency and effectiveness boost in their production and factory lines.

One of the numerous advantages of INNOVATEFIL® PP SUPPORT is how simple it is to use. This is because INNOVATEFIL® PP SUPPORT is a BREAKAWAY material, which makes it very simple to remove it from the finished product and eliminates the need for any form of dilution. This, in addition to producing a flawless finish in a shorter amount of time, represents a significant reduction in post-processing work and efficiency never previously attained by any material in the industry.

LayBrick is printable from smooth to the very rough surface, near sandstone.

LayBrick feels like stone and is just great for architecture models and landscapes

Printed objects can also be coloured and easily ground.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of raspberry red PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Polymaker dual PolyTerra Foggy Purple is a duality of filament colours: half of the fibre cross-section is purple, and the other half is grey. As a result, the printed element has effective shading.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

PolyFlex™ is a highly flexible yet easy to print 3D printing material. Featuring good elasticity and a large strain-to-failure, PolyFlex™ opens up a completely new realm of applications. jams.

PolyFlex™ is designed to be compatible with almost all desktop FDM/FFF printers and requires no hardware modification.  Not only does it print smoothly but adheres well to a large variety of surfaces with no need for a heated build plate leaving you to think about nothing other than what model your going to print.

Smartfil PVA or polyvinyl alcohol is a water-soluble filament used as support material in 3D printing. It is especially recommended to use for PLA pieces to reach those points where the support structure is complex or inaccessible. Later, it can be removed by putting the piece in water, It is also a biodegradable filament, non-toxic and odourless.

Spectrum PETG Premium is made by a Polish manufacturer Spectrum Filaments. It is the second most popular material for desktop 3D printing. A major advantage provided by Spectrum PETG Premium is the virtually zero shrinkage rate and low absorption of moisture as compared to other thermoplastics used for FDM/FFF 3D printing. Items manufactured with PETG maintain stable properties over a long life. Spectrum PETG Premium combines the advantages of PLA and ABS. It also provides nearly trouble-free printing and exceptional adhesion between layers.

Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.

Regular PLA is a very brittle material, which greatly limits its range of applications.  Polymaker PolyMax PLA was designed to change this.  Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.