Smarfil PLA is a high-quality PLA filament by Spanish manufacturer Smart Materials 3D. The Smartfil PLA Skin range is a series of PLA filament skin colour tones, these are especially indicated for applications of anatomical models, medical splints and orthoses in general, as well as 3d modelling and prototyping to achieve the most precise skin hue possible.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA HS BK filament, made of polyamide 6 (PA6), is characterized by very good mechanical strength and contains a thermal stabilizer that enables continuous operation, the details of which in the reinforcement reach 130°C.

Tarfuse® PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. The PLA with glitter filament gets a unique and shiny finish in your pieces. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of bright yellow PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Filament produced by Polish manufacturer 3D Kordo.

ASA (Acrylonitrile Styrene Acrylate) is a UV-resistant weatherable polymer. Our ASA has a low-gloss matte finish that makes it a perfect filament for technical prints - especially when you don't want the high-gloss surface finish often associated with many other 3D printing materials such as ABS, PETG, or PLA. ASA's UV stability makes it an ideal material for outdoor applications that will experience intense exposure to the sun and weather.  ASA's exceptional mechanical and thermal properties - coupled with excellent UV stability - is why this resin is used in the Auto, Marine, and RV industries for exterior applications such as mirror housings, cowl covers, radiator grills, and sensor housings. 

Sparkly violet PLA 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.

Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA HS BK filament, made of polyamide 6 (PA6), is characterized by very good mechanical strength and contains a thermal stabilizer that enables continuous operation, the details of which in the reinforcement reach 130°C.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of raspberry red PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

The highest quality Everfil PC-ABS 3D printing filament from the Polish manufacturer, 3D Kordo.

Everfil PC-ABS 3D printing filament is a blend of PC/ABS polymers that provide enhanced mechanical and heat resistance, as well as a good surface print finish and good surface metal adhesion. Models printed from Everfil PC-ABS filament are designed for applications requiring high deflection temperature under load and high strength at low and high temperatures.