Polymaker PolyLite PLA filament 1,75 mm, which changes colour from natural to orange when under UV light or sunlight, 1kg

PolyLite PLA is a high-quality PLA designed for reliability and ease of printing. This UV-changing PLA changes colour to Orange when under UV light or sunlight. Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology ensuring consistent extrusion and preventing jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest developments in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

Temperature Range:
180 – 240 °C

Recommended 3D printing temperature:
190 – 200 °C (Diameter of 1.75mm and with Heated Bed)
210 – 230 °C (Diameter of 1.75mm and without a Heated Bed)

Recommended 3D print speed:

40 – 120 mm/s

Glass Transition Temp
~ 60 °C (140 °F)

Filament Melting Point
150 – 160 °C (302 – 320 °F)

Density
1.25 g/cm3

Diameters
1.75 mm or 3 mm

Tolerance
± 0.05 mm
50 Microns
(Typical~ 0.02 mm )

Dimensions of the spool: 

- Diameter: 20,00 cm, 
- Height: 4,65 cm, 
- Hole diameter: 6,50 cm