Sparkly black PLA 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.

Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PolyFlex™ is a highly flexible yet easy to print 3D printing material. Featuring good elasticity and a large strain-to-failure, PolyFlex™ opens up a completely new realm of applications. jams.

PolyFlex™ is designed to be compatible with almost all desktop FDM/FFF printers and requires no hardware modification.  Not only does it print smoothly but adheres well to a large variety of surfaces with no need for a heated build plate leaving you to think about nothing other than what model your going to print.

We are pleased to introduce the PC 275 filament, which is an excellent choice for all 3D printing enthusiasts and professionals looking for a material with exceptional properties. Spectrum PC 275 is a professional, high-class filament characterized by unrivalled features and parameters.

The modification of the Spectrum PC 275 filament composition aimed to reduce the high shrinkage typical of PC-based materials and to increase adhesion between layers. Thanks to this, PC 275 filament is characterized by excellent stability during the 3D printing process, which translates into excellent precision and accuracy of the printed objects. The filament also has improved flow parameters allowing printing at high speeds.

Filament for 3D printing PETG of the Polish manufacturer 3DKordo in blue matte. The modified polymer composition allows you to achieve a beautiful matte finish of the printed element.

PETG filament is a thermoplastic polymer from a group of polyesters in a utility version, intended for 3D printing using the FFF method. PETG filament, also known as polyethene terephthalate, is a copolyester known for its conductivity and ease of use. PETG filament has the stiffness and mechanical properties of ABS filament but is as easy to print as PLA filament.
The filament for printing PETG from the manufacturer 3DKordo is wound on a spool, it appeared in a vacuum.

Filament produced on request marwiol by Polish manufacturer 3D Kordo.

Filament PETG - a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open-source structures before use. PETG is material friendly for beginners, the material is available in covering and transparent colours.

Polymaker PolyLite PLA contains with increased quantity an additive thanks to which the printed element glows with its own, in this case, blue, light after prior exposure to light from the outside. Polymaker PolyLite PLA  is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology, ensuring consistent extrusion and preventing jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest developments in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

PolySupport™ is a material designed to solve one of the most intimidating problems in desktop FDM/FFF 3D printing: support. PolySupport™ generates support structures that can be easily removed by hand.

PolySupport™ can be used on both dual and single-extrusion printers. It can be used either as a dedicated support material (dual-extrusion) or as both the modelling and support material (single-extrusion). In both cases, the support structure can be easily removed. So no matter what printer you may have you can rely on PolySupport™ to support your creations.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. This material, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Polymaker dual PolyTerra Foggy Purple is a duality of filament colours: half of the fibre cross-section is purple, and the other half is grey. As a result, the printed element has effective shading.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.