Smartfil Wood is a First-class PLA filament with a high percentage of natural wood. PLA filament Smartfil Wood does not incorporate recycled material or recuperated, so you will do excellent printing resolution. This 3D printing filament presents a lot of design possibilities, we can make it sculptural replicas, models simulating Wood, pieces of habitat design, furniture, wood utensils, etc...
Smartfil Wood PLA filament is a high-quality PLA filament with a high wood load combined with a variety of pigments to simulate the appearance and feel of real wood.

Sparkly black PETG 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Recommended printing temperature 220-250 °C

Heated bed temperature - 70-80°C

You can print at 90mm/s. 

Dimensions of the spool:

- Diameter: 20,0 cm,
- Height: 7,0 cm,
- Hole diameter: 5,2 cm. 

Spectrum Light Weight PLA filament is a modern filament based on PLA. The uniqueness of this material results from the use of innovative active foaming technology, activated by temperature.

In the full foaming phase, the filament increases its volume by over 2 times, reaching an extremely low density of approximately 0.52 g/cm3. This material gives the user incredible flexibility in adjusting material flow, allowing it to be reduced by up to 55%. This, in turn, allows you to create elements with significantly reduced weight. Additionally, it is possible to use the foaming ability to speed up the 3D printing process by using layers of greater thickness or single, solid outlines.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA M filament, made of polyamide 6 (PA6), is characterized by very good mechanical strength and modified properties tribological, which causes a decrease in the coefficient of friction.

PLA filament was produced on request by marwiol.com by Polish manufacturer 3D Kordo. Our 3D printing filament combines high quality at an affordable price.

3D printing filament wound on a spool and vacuum packed. The spool contains 1 kg of green PLA filament 1,75 mm.

3DNYLON 30 ml is a professional adhesion solution developed to improve the bonding of Nylon-based filaments to the build plate of your 3D printer. Its specially formulated composition provides strong and reliable first-layer adhesion, helping to reduce warping, lifting and print deformation throughout the printing process.

The formula has been specifically developed for Nylon (PA) – a material valued for its excellent strength, durability and flexibility, but also known for being particularly demanding when it comes to build plate adhesion.

SILK filament was created from a combination of PLA and PET-G materials, to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk filament exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.

Polymaker PolyLite PLA contains an additive thanks to which the printed element glows with its own, in this case, blue, light after prior exposure to light from the outside. Polymaker PolyLite PLA  is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!