Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA LM filament, made of polyamide 6 (PA6), has excellent mechanical properties as well as thermal and chemical resistance Contains an additive for laser marking of the printed part using the Nd/YAG laser.

Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.

Regular PLA is a very brittle material, which greatly limits its range of applications.  Polymaker PolyMax PLA was designed to change this.  Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.

PolyFlex™ is a highly flexible yet easy to print 3D printing material. Featuring good elasticity and a large strain-to-failure, PolyFlex™ opens up a completely new realm of applications. jams.

PolyFlex™ is designed to be compatible with almost all desktop FDM/FFF printers and requires no hardware modification.  Not only does it print smoothly but adheres well to a large variety of surfaces with no need for a heated build plate leaving you to think about nothing other than what model your going to print.

PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight.

PolyLite™ LW-PLA is not an active foaming filament, which means it will not foam when extruded from the nozzle depending on the temperature. PolyLite™ LW-PLA is already pre-foamed.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of flashy red PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA6 CF10 filament is polyamide 6 (PA6) reinforced with staple carbon fibre (10%). Thanks to this, the material has antistatic and electrically conductive properties. It is perfect for printing elements with high strength requirements. Printed elements are characterised by reduced water absorption.

Spectrum Light Weight PLA filament is a modern filament based on PLA. The uniqueness of this material results from the use of innovative active foaming technology, activated by temperature.

In the full foaming phase, the filament increases its volume by over 2 times, reaching an extremely low density of approximately 0.52 g/cm3. This material gives the user incredible flexibility in adjusting material flow, allowing it to be reduced by up to 55%. This, in turn, allows you to create elements with significantly reduced weight. Additionally, it is possible to use the foaming ability to speed up the 3D printing process by using layers of greater thickness or single, solid outlines.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

Spectrum PET-G Glow in the Dark is a PET-G-based filament blended with a concentrated phosphorescent pigment which causes the phosphorescence effect. Accordingly, they will emit their light once the printed items are exposed to an external light source. The material has all the typical characteristics of the pure PET-G. The added pigment has a neutral impact on the material’s properties