PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of maroon PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Polymaker dual PolyTerra Foggy Orange is a duality of filament colours: half of the fibre cross-section is orange, and the other half is grey. As a result, the printed element has effective shading.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

PolyPlus™ PLA is a premium PLA designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, PolyPlus™ PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle-jams!

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of navy blue PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Lattice PC filament is a medical-grade polymer of high-quality Polycarbonate [PC]. This transparent filament with blue reflections, solid and resistant, will make 3D parts with applications in contact with the skin.

Polycarbonate is an amorphous thermoplastic known for its very high strength and resistance to high temperatures. The PC filament is made from granules complying with ISO 10993-5 certification for skin contact, it is also autoclavable and can be used in the operating room for guided surgeries. This filament is generally used for printing 3D parts such as surgical guides and cutting guides, or medical instruments.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of dark steel PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.