Languages
Currencies
Forgot your password? Register
PolySupport filament 1,75 mm , spool 0,5 kg
PolySupport filament 1,75 mm , spool 0,5 kg
€30.00 €25.00 €24.39 €20.32
szt.
PLA PolyPlus filament 2,85 mm, translucent orange, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, translucent orange, spool 0,75 kg
€25.00 €20.00 €20.32 €16.26
szt.
Filament 3D Cork 2,85 mm , spool 0,8 kg
Filament 3D Cork 2,85 mm , spool 0,8 kg
€34.98 €17.49 €28.44 €14.22
szt.
PC (Polycarbonate) 2,85 mm glass-clear 0,75 kg
PC (Polycarbonate) 2,85 mm glass-clear 0,75 kg
€42.50 €21.25 €34.55 €17.28
szt.
HIPS filament 2,85 mm, natural,  1 kg
HIPS filament 2,85 mm, natural, 1 kg
€25.00 €17.50 €20.32 €14.23
szt.
PLA PolyPlus filament 2,85 mm, translucent yellow, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, translucent yellow, spool 0,75 kg
€25.00 €18.75 €20.32 €15.24
szt.
PLA PolyPlus filament 2,85 mm, natural, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, natural, spool 0,75 kg
€25.00 €18.75 €20.32 €15.24
szt.
PLA PolyPlus filament 2,85 mm, blue, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, blue, spool 0,75 kg
€25.00 €18.75 €20.32 €15.24
szt.
PLA PolyPlus filament 2,85 mm, yellow, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, yellow, spool 0,75 kg
€25.00 €18.75 €20.32 €15.24
szt.
PLA PolyPlus filament 2,85 mm, gray, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, gray, spool 0,75 kg
€25.00 €18.75 €20.32 €15.24
szt.
PLA PolyPlus filament 2,85 mm, purple, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, purple, spool 0,75 kg
€25.00 €18.75 €20.32 €15.24
szt.
PLA PolyPlus filament 2,85 mm, black, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, black, spool 0,75 kg
€25.00 €18.75 €20.32 €15.24
szt.
PET-G filament 1,75 mm, black, spool 1 kg
PET-G filament 1,75 mm, black, spool 1 kg
€16.25 €13.21
szt.

cc-products

Gel-Lay Filament 1,75 mm, coil 250 g

Gel-Lay Filament 1,75 mm, coil 250 g
Gel-Lay Filament 1,75 mm, coil 250 g

Gel-Lay is soft and gel-like when wet. After drying, it is not elastic (like rubber) but flexible. It swims and is also suitable for aquamarine applications.

Rinse in water:
- print thin walls and heep filling rate as low as possible to shorten the time for rinsing
- gently rinse with water, hot water and patience provides good results
- you can clearly notice the effect and that the material is getting softer after one day
- after three days every PVA should be gone
- stir and change the water often
- you can reduce the rinsing time by using an ultrasonic cleaner
- remaining water can be removed from the object quickly by using a clothes dryer
- repeatedly rinsing: fresh water → Wait → Dryer → fresh water → Wait → Dryer
- PVA residues feel greasy, like sugar syrup
- remove all PVA residues

Shipment date:: 24 hours

Price: €36.25 (net: €29.47 )
szt.

Gel-Lay Filament 2,85 mm, coil 250 g

Gel-Lay Filament 2,85 mm, coil 250 g
Gel-Lay Filament 2,85 mm, coil 250 g

Gel-Lay is soft and gel-like when wet. After drying, it is not elastic (like rubber) but flexible. It swims and is also suitable for aquamarine applications.

Rinse in water:
- print thin walls and heep filling rate as low as possible to shorten the time for rinsing
- gently rinse with water, hot water and patience provides good results
- you can clearly notice the effect and that the material is getting softer after one day
- after three days every PVA should be gone
- stir and change the water often
- you can reduce the rinsing time by using an ultrasonic cleaner
- remaining water can be removed from the object quickly by using a clothes dryer
- repeatedly rinsing: fresh water → Wait → Dryer → fresh water → Wait → Dryer
- PVA residues feel greasy, like sugar syrup
- remove all PVA residues

Shipment date:: 24 hours

Price: €22.25 (net: €18.09 )
szt.

Lay-Felt Filament 1,75 mm, coil 250 g

Lay-Felt Filament 1,75 mm, coil 250 g
Lay-Felt Filament 1,75 mm, coil 250 g

The material consists of two parts: an elastomer that is responsible for the rubber-like feel and material property, and a water-soluble ingredient. After printing, the object is placed in water whereby after one and four days, leaving behind the elastomer, and thus the soft porous object.

Rinse in water:
- print thin walls and heep filling rate as low as possible to shorten the time for rinsing
- gently rinse with water, hot water and patience provides good results
- you can clearly notice the effect and that the material is getting softer after one day
- after three days every PVA should be gone
- stir and change the water often
- you can reduce the rinsing time by using an ultrasonic cleaner
- remaining water can be removed from the object quickly by using a clothes dryer
- repeatedly rinsing: fresh water → Wait → Dryer → fresh water → Wait → Dryer
- PVA residues feel greasy, like sugar syrup
- remove all PVA residues

Shipment date:: 24 hours

Price: €22.25 (net: €18.09 )
szt.

Lay-Felt Filament 2,85 mm, coil 250 g

Lay-Felt Filament 2,85 mm, coil 250 g
Lay-Felt Filament 2,85 mm, coil 250 g

The material consists of two parts: an elastomer that is responsible for the rubber-like feel and material property, and a water-soluble ingredient. After printing, the object is placed in water whereby after one and four days, leaving behind the elastomer, and thus the soft porous object.

Rinse in water:
- print thin walls and heep filling rate as low as possible to shorten the time for rinsing
- gently rinse with water, hot water and patience provides good results
- you can clearly notice the effect and that the material is getting softer after one day
- after three days every PVA should be gone
- stir and change the water often
- you can reduce the rinsing time by using an ultrasonic cleaner
- remaining water can be removed from the object quickly by using a clothes dryer
- repeatedly rinsing: fresh water → Wait → Dryer → fresh water → Wait → Dryer
- PVA residues feel greasy, like sugar syrup
- remove all PVA residues

Poro-Lay are experimental filaments for experimental and experienced user. Help for processing and a great ideas for new 3D objects can be found in the prestigious forums.

The components of Poro-Lay are harmless and food safe. The water-soluble component is even biocompatible. However, we strongly advise not to eat the material. 

Poro-Lay is best stored dry. If the material absorbed moisture after some time, the filament can be dried in an oven at about 80 ° C for four to five hours. We recommend drying the filament before the very first print.

Shipment date:: 24 hours

Price: €22.25 (net: €18.09 )
szt.

LayBrick filament 2,85 mm 0,25 kg

LayBrick filament 2,85 mm 0,25 kg
LayBrick filament 2,85 mm 0,25 kg

LayBrick is printable from smooth to the very rough surface, near sandstone

LayBrick feels like stone and is just great for architecture models and landscapes

Printed objects can also be coloured and easily ground.

 

Shipment date:: 24 hours

Price: €8.75 €17.50 (net: €7.12 €14.23 )
szt.
  • promotion

LayBrick filament 2,85 mm 0,25 kg (two coils: 0,20 kg + 0,05 kg)

LayBrick filament 2,85 mm 0,25 kg (two coils: 0,20 kg + 0,05 kg)
LayBrick filament 2,85 mm 0,25 kg (two coils: 0,20 kg + 0,05 kg)

LayBrick is printable from smooth to the very rough surface, near sandstone.

LayBrick feels like stone and is just great for architecture models and landscapes

Printed objects can also be coloured and easily ground.

 

Shipment date:: 24 hours

Price: €8.13 €16.25 (net: €6.61 €13.21 )
szt.
  • promotion

LayFomm 40 filament, 1,75 mm, 0,25 kg

LayFomm 40 filament, 1,75 mm, 0,25 kg
LayFomm 40 filament, 1,75 mm, 0,25 kg

One ring filament out of Lay-Fomm 60

Lay-Fomm 40 is a foamy material and is highly porous. Lay-Fomm is printable with all standard home 3D printers. Lay-Fomm 40 is made from rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object. Lay-Fomm 40 is slightly softer than Lay-Fomm 60.

 

Shipment date:: 24 hours

Price: €29.75 (net: €24.19 )
szt.

LayFomm 40 filament, 2,85 mm, 0,25 kg

LayFomm 40 filament, 2,85 mm, 0,25 kg
LayFomm 40 filament, 2,85 mm, 0,25 kg

One ring filament out of Lay-Fomm 60

Lay-Fomm 40 is a foamy material and is highly porous. Lay-Fomm is printable with all standard home 3D printers. Lay-Fomm 40 is made from rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object. Lay-Fomm 40 is slightly softer than Lay-Fomm 60.

 

Shipment date:: 24 hours

Price: €22.25 (net: €18.09 )
szt.

LayFomm 60 filament 1,75 mm 0,25 kg

LayFomm 60 filament 1,75 mm 0,25 kg
LayFomm 60 filament 1,75 mm 0,25 kg

One ring filament out of Lay-Fomm 60

LayFomm 60 is a foamy material and is highly porous. Lay-Fomm is printable with all standard home 3D printers. LayFomm 60 is made from rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object. Lay-Fomm 60 is slightly firmer than LayFomm 40.

 

Shipment date:: 24 hours

Price: €29.75 (net: €24.19 )
szt.

LayFomm 60 filament, 2,85 mm, 0,25 kg

LayFomm 60 filament, 2,85 mm, 0,25 kg
LayFomm 60 filament, 2,85 mm, 0,25 kg

One ring filament out of Lay-Fomm 60

LayFomm 60 is a foamy material and is highly porous. Lay-Fomm is printable with all standard home 3D printers. LayFomm 60 is made from rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object. Lay-Fomm 60 is slightly firmer than LayFomm 40.

 

Shipment date:: 24 hours

Price: €22.25 (net: €18.09 )
szt.

LayWoo-d3 filament 2,85 mm 0,25 kg

LayWoo-d3 filament 2,85 mm 0,25 kg
LayWoo-d3 filament 2,85 mm 0,25 kg

One ring filament out of Laywoo-d3.

The evolutionary Laywoo-d3 looks like wood and smells like wood.

Because it is also made from recycled wood, printed objects can be ground well.

 

Shipment date:: 24 hours

Price: €14.75 €17.50 (net: €11.99 €14.23 )
szt.
  • promotion

LayWoo-d3 Flex filament 2,85 mm 0,25 kg

LayWoo-d3 Flex filament 2,85 mm 0,25 kg
LayWoo-d3 Flex filament 2,85 mm 0,25 kg

One ring filament out of flexible Laywoo-d3.

The evolutionary Laywoo-d3 looks like wood and smells like wood.

Because it is also made from recycled wood, printed objects can be ground well.

 

Shipment date:: 24 hours

Price: €8.75 €17.50 (net: €7.12 €14.23 )
szt.
  • promotion

MoldLay (casting wax) filament 1.75 mm, coil 250 g

MoldLay (casting wax) filament 1.75 mm, coil 250 g
MoldLay (casting wax) filament 1.75 mm, coil 250 g

MoldLay is a wax-like material. You can build casting moulds and create objects for the lost wax process.

Advantages of MoldLay:
-almost no warp 
-low viscosity at high temperature
-very good dimensional stability
-solid and keeps its shape
-no heated bed is necessary
-low processing temperature (~ 170 - 185°C)
-liquefies at ~. 270°C (emptying the cast)

 

Shipment date:: 24 hours

Price: €31.25 (net: €25.41 )
szt.

MoldLay (casting wax) filament 1.75 mm, spool 0,75 kg

MoldLay (casting wax) filament 1.75 mm, spool 0,75 kg
MoldLay (casting wax) filament 1.75 mm, spool 0,75 kg

MoldLay is a wax-like material. You can build casting moulds and create objects for the lost wax process.

Advantages of MoldLay:
-almost no warp 
-low viscosity at high temperature
-very good dimensional stability
-solid and keeps its shape
-no heated bed is necessary
-low processing temperature (~ 170 - 185°C)
-liquefies at ~. 270°C (emptying the cast)

 

Shipment date:: 24 hours

Price: €67.50 (net: €54.88 )
szt.

MoldLay (casting wax) filament 2.85 mm, coil 250 g

MoldLay (casting wax) filament 2.85 mm, coil 250 g
MoldLay (casting wax) filament 2.85 mm, coil 250 g

MoldLay is a wax-like material. You can build casting moulds and create objects for the lost wax process.

Advantages of MoldLay:
-almost no warp 
-low viscosity at high temperature
-very good dimensional stability
-solid and keeps its shape
-no heated bed is necessary
-low processing temperature (~ 170 - 185°C)
-liquefies at ~. 270°C (emptying the cast)

 

Shipment date:: 24 hours

Price: €22.50 (net: €18.29 )
szt.

Retroreflective filament Reflect-O-Lay 1.75 mm 0,25 kg

Retroreflective filament Reflect-O-Lay 1.75 mm 0,25 kg
Retroreflective filament Reflect-O-Lay 1.75 mm 0,25 kg

Reflect-O-Lay, the first retroreflective material.

The flexible material appears grey in daylight. Reflect-O-Lay shines and glitters if the material is irradiated with light. This unique feature is caused by the tiny pigments that reflect the light

Shipment date:: 24 hours

Price: €32.25 (net: €26.22 )
szt.
up
Shop is in view mode
View full version of the site
Sklep internetowy Shoper.pl