Sale

Filament PLA - thermoplastic polyester in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 0,33 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PLA is a biodegradable material, produced from renewable natural resources. It is dedicated primarily to amateurs due to trouble-free use.

The filament is produced in Poland.

Filament PLA - thermoplastic polyester in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open-source structures before use. PLA is a biodegradable material, produced from renewable natural resources. It is dedicated primarily to amateurs due to trouble-free use.

LayBrick is printable from smooth to the very rough surface, near sandstone

LayBrick feels like stone and is just great for architecture models and landscapes

Printed objects can also be coloured and easily ground.

One ring filament out of Laywoo-d3.

The evolutionary Laywoo-d3 looks like wood and smells like wood.

Because it is also made from recycled wood, printed objects can be ground well.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PETG FR is a flame-retardant material in class V0 UL94. It is made of high-quality PETG modified with cyclohexanedimethanol. This material is characterised by high mechanical strength, good adhesion of individual layers, and low linear shrinkage. It is characterised by high ease of printing at the level of unmodified PETG. It does not contain halogen derivatives, red phosphorus or asbestos

Tarfuse® filament is a 3D printing filament brand from Grupa Azoty S.A., Poland's largest chemical company.

The Tarfuse® PETG CF15 filament is PETG reinforced with staple carbon fibre (15%). As a result, the material has antistatic and electrically conductive properties. It is perfect for printing elements with high strength requirements.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PETG AM filament is a PETG filament with antibacterial properties, in addition to printing hobby, demonstration and prototype elements. Tarfuse® PA AM is approved for contact with food in accordance with Regulation (EU) 10/2011 and subsequent amendments.

Details in 3D technology, i.e. as well as prototypes and functional details due to the fact that the layered function can affect the environment for the development of bacteria and fungi. Even after a basic wash often no extra detail can be obtained, this is critical for children's hobby prints. Thanks to the elements made of antibacterial filament, the proliferation of bacteria and fungi is therefore reduced, and the risk of spreading germs among users is reduced.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA6 GF30 filament is polyamide 6 (PA6) reinforced with staple glass fibre. Thanks to this, the material has antistatic and electrically conductive properties. It is perfect for printing elements with high strength requirements. Printed elements are characterised by reduced water absorption.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA6 CF15 filament is polyamide 6 (PA6) reinforced with staple carbon fibre (15%). Thanks to this, the material has antistatic and electrically conductive properties. It is perfect for printing elements with high strength requirements. Printed elements are characterised by reduced water absorption.