- ABS 1,75 mm(12)
- ABS 2,85 mm(1)
- PLA 1,75 mm(171)
- PLA 1,75 mm matt(25)
- Lightweight PLA (LW-PLA)(8)
- High-Speed PLA(13)
- PLA 2,85 mm(12)
- PETG 1,75 mm(87)
- PETG 1,75 mm matt(17)
- PETG 2,85 mm(3)
- SILK(27)
- ASA 1,75 mm(18)
- Nylon (PA)(43)
- PC (Polycarbon.) 1,75 mm(26)
- PC (Polycarbon.) 2,85 mm(4)
- Flexible filaments (TPU) 1,75 mm(39)
- Flexible filaments (TPU) 2,85 mm(4)
- PCTG(1)
- HIPS 1,75 mm(0)
- HIPS 2,85 mm(1)
- PVA(2)
- PP (Polypropylen)(9)
- PMMA(1)
- POM(4)
- CoPE(5)
- Supporting filaments(5)
- Technical filaments(80)
- Medical filaments(10)
- Filaments with graphene(1)
- Filament for 3D pen(3)
- PolyMax PLA 1,75 mm(10)
- PolyMax PLA 2,85 mm(4)
- PolyTerra PLA(24)
- PolyMax PET(0)
- PolyFlex 90A 1,75 mm(5)
- PolyFlex 95A 1,75 mm(8)
- PolyLite Silk PLA 1,75 mm(5)
- PolyLite / PolyPlus PLA 1,75 mm(26)
- PolyLite Pro PLA 1,75 mm(4)
- PolyPlus PLA 2,85 mm(5)
- PolyWood(1)
- Filaments with wood fibres(9)
- Filaments imitating marble(3)
- PoroLay(5)
- MoldLay(1)
- Accessories(28)
- Sale(4)
- News link
- Promotions link
€48.78
Regular price:
€55.43
€39.66
Regular price:
€45.06
€48.78
Regular price:
€55.43
€39.66
Regular price:
€45.06
€48.78
Regular price:
€55.43
€39.66
Regular price:
€45.06
Polymaker Panchroma CoPE filament 1,75 mm, red, 1 kg
Regular price:
Regular price:
product unavailable
add to wishlist
Description
Polymaker Panchroma CoPE is a copolyester-based 3D printing filament designed for effortless printing and an exceptionally high-quality surface finish. Its innovative formula enhances bridging and overhang performance while enabling reliable high-speed printing at speeds of up to 400mm/s.
This formula offers exceptional bed adhesion, helping to prevent warping even on challenging prints. However, in some cases, it adheres so well that we recommend using a release agent like Magigoo or Vision Miner to assist with part removal. Textured PEI build plates are not recommended, as adhesion may be too strong. For the easiest release, allow prints to cool to room temperature before fully.
This material does not bond well with standard PLA, making it unsuitable for combining with other Panchroma effects in a single print—but that low adhesion can be an advantage when using it as a breakaway support material for PLA.
Recommended 3D printing temperature:
200 – 230 °C
Build plate temperature:
25-60°C
Recommended 3D print speed:
up to 400 mm/s