Gel-Lay Filament 2,85 mm, coil 250 g

Shipment date:: 24 hours

Gross price: €19.73

Regular price:

19.73

The lowest price during 30 days prior to the reduction:

Net price: €16.04

Regular price:

The lowest price during 30 days prior to the reduction:

quantity szt.

product unavailable

add to wishlist

Producer:

Description

Gel-Lay is another 3D printing filament created by Kai Parthy, the creator of such filaments as LayWood, Lay Brick and Reflect-o-Lay. Gel-Lay filament is a 3D printing material with two components: an elastomer similar to rubber (TPU) and a water-soluble (PVA). After printing, place the item in water. After one to four days water-soluble (PVA) component dissolves. As a result, we received a soft, porous item. Importantly, the pores are not visible to the naked eye. The Gel-Lay filament is characterized by negligible deformation during printing.

Recommended printing temperature: 230-240 °C

Gel-Lay ingredients are harmless and food safe.

The filament should be stored in dry a place. If the material has absorbed moisture, the fibre can be dried at around 80°C for four to five hours. Check the drying of the filament before the first print.

Nominal diameter	2.85 mm
Material	Gel-Lay
Colour	beige
Printing temperature	220 - 240 °C
Hardness	not necessary, likely 50 °C
Length	> meter
Weight	approx. 250 g

The filament comes in a reseable zip bag.

Gel-Lay Filament 2,85 mm, coil 250 g

Description

Safety