Filament PET-G Glow in the Dark 1.75mm BLUE 0.5 kg

pol_pm_Filament-Spectrum-PET-G-Glow-in-the-Dark-1-75mm-BLUE-0-5kg-1334_4.jpg

Shipment date:: 24 hours

Gross price: €24.17 24.17

Net price: €19.65

quantity szt.

product unavailable

add to wishlist

Producer: Spectrum Filaments

Description

Spectrum PET-G Glow in the Dark is a PET-G-based filament blended with a concentrated phosphorescent pigment which causes the phosphorescence effect. Accordingly, they will emit their light once the printed items are exposed to an external light source. The material has all the typical characteristics of the pure PET-G. The added pigment has a neutral impact on the material’s properties.

The addition of a phosphorescent pigment to PET-G provides for the following properties in printed items:

- The capability to emit its light after prior exposure to an external source of light, and

- The possibility of controlling the light intensity of printed items by adjusting the wall thickness and filler density.

Tip: To achieve a stronger and longer-lasting glowing effect, leave the model exposed to light for a longer time. The presence of phosphorescent pigment may also cause the wear of brass nozzles; thus, it is recommended to use stainless steel nozzles for prolonged application of Spectrum PLA Glow in the Dark.

Recommended print settings:

Printing temperature: 230-255°C

Heated bed temperature: 60-80°C

Printing speed: 30-70mm/s

Dimensions of the spool:

- Diameter: 20,0 cm,
- Height: 6,7 cm,
- Hole diameter: 5,2 cm.