Polymaker Panchroma CoPE is a copolyester-based 3D printing filament designed for effortless printing and an exceptionally high-quality surface finish. Its innovative formula enhances bridging and overhang performance while enabling reliable high-speed printing at speeds of up to 400mm/s.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 0,33 kg of gray PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA6 GF15 filament is polyamide 6 (PA6) reinforced with staple glass fibre. Thanks to this, the material has antistatic and electrically conductive properties. It is perfect for printing elements with high strength requirements. Printed elements are characterised by reduced water absorption.

Polymaker PolyPlus PLA is a premium PLA designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyPlus PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

.

Innovatefil® PEI is a 3D printing filament made of ULTEM™ 9085 resin. Due to its high glass transition temperature, it offers excellent properties at elevated temperatures.

Innovatefil PEI is a thermoplastic filament to be used in applications where high performance is required. It is focused on the aerospace, military or automotive sector. Its main advantage is its resistance/weight ratio, it also has excellent thermal and chemical resistance so it is especially suitable for objects with demanding applications.

Gel-Lay is another 3D printing filament created by Kai Parthy, the creator of such filaments as LayWood, Lay Brick and Reflect-o-Lay. Gel-Lay filament is a 3D printing material with two components: an elastomer similar to rubber (TPU) and a water-soluble (PVA). After printing, place the item in water. After one to four days water-soluble (PVA) component dissolves. As a result, we received a soft, porous item. Importantly, the pores are not visible to the naked eye. The Gel-Lay filament is characterized by negligible deformation during printing.

Polymaker dual PolyTerra Foggy Purple is a duality of filament colours: half of the fibre cross-section is purple, and the other half is grey. As a result, the printed element has effective shading.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

The highest quality Everfil ABS-PC 3D printing filament from the Polish manufacturer, 3D Kordo.

Everfil ABS-PC 3D printing filament is a blend of ABS and PC polymers, in proportions 80/20, that provide enhanced mechanical and heat resistance, as well as a good surface print finish and good surface metal adhesion. Models printed from Everfil ABS-PC filament are designed for applications requiring high deflection temperature under load and high strength at low and high temperatures.

Polymaker PolyLite PETG is an affordable PETG filament with balanced mechanical properties and ease of printing. PolyLite PETG is just as easy to print as PolyLite PLA while offering an additional 20˚C heat resistance and more durability. This lends PolyLite PETG to more functional applications where PLA would lack the durability or heat resistance such as lighting fixtures, vibrational parts or more functional product design prototypes.