Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA6 CF10 filament is polyamide 6 (PA6) reinforced with staple carbon fibre (10%). Thanks to this, the material has antistatic and electrically conductive properties. It is perfect for printing elements with high strength requirements. Printed elements are characterised by reduced water absorption.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of mint PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

The highest quality Everfil PC-ABS 3D printing filament from the Polish manufacturer, 3D Kordo.

Everfil PC-ABS 3D printing filament is a blend of PC/ABS polymers that provide enhanced mechanical and heat resistance, as well as a good surface print finish and good surface metal adhesion. Models printed from Everfil PC-ABS filament are designed for applications requiring high deflection temperature under load and high strength at low and high temperatures.

Sparkly black PETG 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Recommended printing temperature 220-250 °C

Heated bed temperature - 70-80°C

You can print at 90mm/s. 

Dimensions of the spool:

- Diameter: 20,0 cm,
- Height: 7,0 cm,
- Hole diameter: 5,2 cm. 

D-Limonene is the perfect solvent for anyone wanting to print support heavy multi extrusion 3D models who do not want to spend hours having to manually remove, non-dissolvable, support structures. The D-limonene will initially soften the hips and over time dissolve the material completely leaving nothing but a sticky sludge that is easy to clean off with a brush and hot water.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PETG FR is a flame-retardant material in class V0 UL94. It is made of high-quality PETG modified with cyclohexanedimethanol. This material is characterised by high mechanical strength, good adhesion of individual layers, and low linear shrinkage. It is characterised by high ease of printing at the level of unmodified PETG. It does not contain halogen derivatives, red phosphorus or asbestos

Tarfuse® PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. The PLA with glitter filament gets a unique and shiny finish in your pieces. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA6 GF15 filament is polyamide 6 (PA6) reinforced with staple glass fibre. Thanks to this, the material has antistatic and electrically conductive properties. It is perfect for printing elements with high strength requirements. Printed elements are characterised by reduced water absorption.

This filament is a modified PLA to make it machinable and obtain a completely smooth surface finish. Sanding it with sandpaper together with water leaves a similar finish to ceramic. It can also be painted with any kind of paint. It is recommended for architecture, odontology, restoration, models, imitations of sculptures, etc…