PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of brick red PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.

Regular PLA is a very brittle material, which greatly limits its range of applications.  Polymaker PolyMax PLA was designed to change this.  Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Polymaker dual PolyTerra Foggy Purple is a duality of filament colours: half of the fibre cross-section is purple, and the other half is grey. As a result, the printed element has effective shading.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

ASA (Acrylonitirle Styrene Acrylate) is a UV-resistant weatherable polymer. Our ASA has a low-gloss matte finish that makes it a perfect filament for technical prints - especially when you don't want the high-gloss surface finish often associated with many other 3D printing materials such as ABS, PETG, or PLA. ASA's UV-stability makes it an ideal material for outdoor applications that will experience intense exposure to the sun and weather.  ASA's exceptional mechanical and thermal properties - coupled with excellent UV-stability - is why this resin is used the Auto, Marine, and RV industries for exterior applications such as mirror housings, cowl covers, radiator grills, and sensor housings. 

Spectrum Premium PLA High-Speed filament is designed for fast 3D printing at speeds of up to 800mm/s, allowing for the creation of highly precise models in significantly shorter times. This filament has been optimized for high-speed 3D printing technology, ensuring high flowability, rapid cooling and precise reproduction of details.
The enhanced mechanical properties of Premium PLA High Speed, surpassing standard PLA, are particularly important when printing at high speeds. The material stands out for its increased impact resistance and excellent layer adhesion. Premium PLA High Speed also boasts exceptional performance and quality, making it ideal for many applications, including rapid prototyping and conceptual modelling.

PolyFlex™ is a highly flexible yet easy to print 3D printing material. Featuring good elasticity and a large strain-to-failure, PolyFlex™ opens up a completely new realm of applications. jams.

PolyFlex™️ TPU90, created from Covestro’s Addigy®️ family, is a thermoplastic polyurethane (TPU) based filament designed to provide great flexibility without compromising on printing speed. It also has the ability to resist ultra-violet (UV) light or sunlight.

Temperature Range:
240 – 280 °C

Recommended 3D printing temperature:
250 – 270 °C

Recommended 3D print speed:
30 – 90 mm/s

Recommended Heated bed:
If equipped set Heating Bed to 80 °C

Everfil PP by Polish manufacturer, 3D Kordo, is a polypropylene 3D printing filament with special additives to improve its adhesion to the printing surface. PP 3D printing filament is a very versatile material, transparent, light and flexible. It also has excellent mechanical and chemical resistance making it ideal for industrial applications.