Temperature Range:
240 – 280 °C

Recommended 3D printing temperature:
250 – 270 °C

Recommended 3D print speed:
30 – 50 mm/s

Recommended Heated bed:
90-105 °C

Spectrum Premium PLA High-Speed filament is designed for fast 3D printing at speeds of up to 800mm/s, allowing for the creation of highly precise models in significantly shorter times. This filament has been optimized for high-speed 3D printing technology, ensuring high flowability, rapid cooling and precise reproduction of details.
The enhanced mechanical properties of Premium PLA High Speed, surpassing standard PLA, are particularly important when printing at high speeds. The material stands out for its increased impact resistance and excellent layer adhesion. Premium PLA High Speed also boasts exceptional performance and quality, making it ideal for many applications, including rapid prototyping and conceptual modelling.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PETG AM filament is a PETG filament with antibacterial properties, in addition to printing hobby, demonstration and prototype elements. Tarfuse® PA AM is approved for contact with food in accordance with Regulation (EU) 10/2011 and subsequent amendments.

Details in 3D technology, i.e. as well as prototypes and functional details due to the fact that the layered function can affect the environment for the development of bacteria and fungi. Even after a basic wash often no extra detail can be obtained, this is critical for children's hobby prints. Thanks to the elements made of antibacterial filament, the proliferation of bacteria and fungi is therefore reduced, and the risk of spreading germs among users is reduced.

PolySupport™ is a material designed to solve one of the most intimidating problems in desktop FDM/FFF 3D printing: support. PolySupport™ generates support structures that can be easily removed by hand.

PolySupport™ can be used on both dual and single-extrusion printers. It can be used either as a dedicated support material (dual-extrusion) or as both the modelling and support material (single-extrusion). In both cases, the support structure can be easily removed. So no matter what printer you may have you can rely on PolySupport™ to support your creations.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of dark grey PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Polymaker PolyPlus PLA is a premium PLA designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyPlus PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight.

PolyLite™ LW-PLA is not an active foaming filament, which means it will not foam when extruded from the nozzle depending on the temperature. PolyLite™ LW-PLA is already pre-foamed.

SILK filament was created from a combination of PLA and PET-G materials, to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk filament exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.

Polymaker PolyMax is an advanced polycarbonate-based filament designed specifically for desktop FDM/FFF 3D printing. In addition to high printing quality, great mechanical strength, and heat resistance, Polymaker PC-Max™ offers excellent impact strength and fracture toughness, making it the ideal choice for engineering applications.

Polymaker PolyMax PC-FR, created from Covestro’s Makrolon® family, could achieve V0 performance in the UL94 flame retardancy test and displays excellent toughness, strength, and heat resistance. This filament opens new applications in the automotive, railway, and aerospace industries.