Polymaker PolyMax PLA filament 1,75 mm, orange, spool 0,75 kg
Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.
Regular PLA is a very brittle material, which greatly limits its range of applications. Polymaker PolyMax PLA was designed to change this. Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.
Shipment date:: 24 hours
Filament PET-G Glow in the Dark 1.75mm BLUE 1 kg
Spectrum PET-G Glow in the Dark is a PET-G-based filament blended with a concentrated phosphorescent pigment which causes the phosphorescence effect. Accordingly, they will emit their light once the printed items are exposed to an external light source. The material has all the typical characteristics of the pure PET-G. The added pigment has a neutral impact on the material’s properties
Shipment date:: 24 hours
Devil Design PETG filament 1,75 mm, dark brown, 1 kg
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.
Shipment date:: 24 hours
Devil Design PLA filament 1,75 mm, galaxy (sparkly) red, spool 1 kg
Sparkly red PLA 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.
Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg PLA filament.
PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.
Shipment date:: 24 hours
Polymaker PC Plus (Polycarbonate) 2,85 mm, white, 0,75 kg
Polymaker PC-Plus™ is a polycarbonate-based filament designed specifically for desktop FDM/FFF 3D printing. It offers superior printing quality, excellent mechanical strength, and heat resistance, with moderate printing temperatures and great warping resistance.
Temperature Range:
240 – 280 °C
Recommended 3D printing temperature:
250 – 270 °C
Recommended 3D print speed:
30 – 90 mm/s
Recommended Heated bed:
If equipped set Heating Bed to 80 °C
Shipment date:: 24 hours
Devil Design PETG filament 1,75 mm, bloody red, 1 kg
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.
Shipment date:: 24 hours
PETG filament 1,75 mm, Tarfuse glossy blue 0,5 kg
Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
Shipment date:: 24 hours
Polymaker PolyTerra PLA filament 1,75 mm, muted purple, 1 kg
PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.
Shipment date:: 24 hours
Devil Design SILK filament, 1,75 mm, silver, 1 kg
SILK filament was created from a combination of PLA and PET-G materials, to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk filament exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.
The SILK 3D printing filament by recognized Polish manufacturer, Devil Design, is an ideal filament for arts and crafts projects, vases and other 3D printed products that can have unique silky properties.
SILK filament is an easy-to-print, non-clogging, natural and non-toxic material for 3D printing. The use of SILK filament is harmless to the user and the environment. SILK filament is ideal for indoor use.
Shipment date:: 24 hours