Tarfuse® PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. The pearl PLA filament gets unique and shiny with a pearly sheen finish in your pieces. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA12 GF30 filament is polyamide 6 (PA6) reinforced with staple glass fibre. Thanks to this, the material has antistatic and electrically conductive properties. It is perfect for printing elements with high strength requirements. Printed elements are characterised by reduced water absorption.

INNOVATEFIL PA CF is a filament with high mechanical strength (tensile strength: 170 MPa) and excellent performance at high temperatures, the combination of polyamide and carbon fibre allows large objects to be printed without deformation.

Among its main advantages, is the ability to work at temperatures of 150 º C. Also, this filament has great adhesion between layers which gives the printed piece great resistance regardless of the printing position.

D-Limonene is the perfect solvent for anyone wanting to print support heavy multi extrusion 3D models who do not want to spend hours having to manually remove, non-dissolvable, support structures. The D-limonene will initially soften the hips and over time dissolve the material completely leaving nothing but a sticky sludge that is easy to clean off with a brush and hot water.

Spectrum PETG MATT is a PETG-based material with a chemical composition modified so that it is possible to obtain matte surfaces of printed objects. The matte finish of printed items considerably improves their aesthetic properties and also minimises the visibility of layers on the side surfaces of printed items.

In addition, Spectrum PETG MATT maintains all the features of PETG-based classic polymers, i.e., easy and highly efficient printing, low shrinkage and very good adhesion between layers and also between the build platform and printed object. Further, the use of admixtures has improved temperature resistance, and impact resistance and lowered the brittleness of printed items.

Polymaker dual PolyTerra Foggy Orange is a duality of filament colours: half of the fibre cross-section is orange, and the other half is grey. As a result, the printed element has effective shading.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

SILK filament was created from a combination of PLA and PET-G materials, to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk filament exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.
The SILK 3D printing filament by recognized Polish manufacturer, Devil Design, is an ideal filament for arts and crafts projects, vases and other 3D printed products that can have unique silky properties.
SILK filament is an easy-to-print, non-clogging, natural and non-toxic material for 3D printing. The use of SILK filament is harmless to the user and the environment. SILK filament is ideal for indoor use.