PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of copper PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight.

PolyLite™ LW-PLA is not an active foaming filament, which means it will not foam when extruded from the nozzle depending on the temperature. PolyLite™ LW-PLA is already pre-foamed.

Polymaker Panchroma CoPE is a copolyester-based 3D printing filament designed for effortless printing and an exceptionally high-quality surface finish. Its innovative formula enhances bridging and overhang performance while enabling reliable high-speed printing at speeds of up to 400mm/s.

Polymaker Panchroma CoPE is a copolyester-based 3D printing filament designed for effortless printing and an exceptionally high-quality surface finish. Its innovative formula enhances bridging and overhang performance while enabling reliable high-speed printing at speeds of up to 400mm/s.

The highest quality filament for 3D printing nylon PA12 was made by a recognized Polish manufacturer, Devil Design. Nylon PA12 is a semi-crystalline plastic that is resistant to high temperatures and chemicals. Items printed with this 3D printing filament can be finished with metalworking tools. The Devil Design nylon PA 12 filament is wound on a spool, vacuum packed with a moisture absorber. The spool contains 0.33 kg of net material.

PolySupport for PA12 is a breakaway support specifically engineered for PA12-based filaments. It has a perfect interface with long-chain nylons, strong enough to support it and easily removable by hand. PolySupport™ for PA12 prints at a similar temperature to PA12 and is compatible with open, enclosed and heated chambers. The filament is green so it's easy to see and remove after printing.

PolySupport™ can be used on both dual and single-extrusion printers. It can be used either as a dedicated support material (dual-extrusion) or as both the modelling and support material (single-extrusion). In both cases, the support structure can be easily removed. So no matter what printer you may have you can rely on PolySupport™ to support your creations.

Innovatefil PP-GF by Spanish manufacturer, Smart Materials 3D is a 3D printing filament with a polypropylene base reinforced with a high load of 20% fibreglass, which considerably improves the dimensional stability of the final piece, achieving very good quality finishes. In addition, thanks to incorporating these fibres, we obtain a more rigid material than PP without load, but with enough flexibility to provide high impact, mechanical and thermal resistance.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PLA AM filament is a PLA filament with antibacterial properties, in addition to printing hobby, demonstration and prototype elements. Tarfuse® PLA AM is approved for contact with food in accordance with Regulation (EU) 10/2011 and subsequent amendments.

Details in 3D technology, i.e. as well as prototypes and functional details due to the fact that the layered function can affect the environment for the development of bacteria and fungi. Even after a basic wash often no extra detail can be obtained, this is critical for children's hobby prints. Thanks to the elements made of antibacterial filament, the proliferation of bacteria and fungi is therefore reduced, and the risk of spreading germs among users is reduced.