Tarfuse® PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. The PLA with glitter filament gets a unique and shiny finish in your pieces. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.

Filament produced by Polish manufacturer 3D Kordo.

Filament PETG - a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum-packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open-source structures before use. PETG is a material friendly for beginners; the material is available in covering and transparent colours.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 0,33 kg of gray PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Tarfuse® Simply PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse envi filament is made from renewable raw materials and designed to be fully biodegradable, meaning it decomposes in the natural environment in the presence of microorganisms. After the biodegradation process, only natural and harmless substances remain, such as water, CO2, and organic matter. Tarfuse® envi is water-soluble and designed for printing display details, such as architectural models for short-term exposure and easy handling.

PLA filament with glitter particles by a Spanish manufacturer, Smart Materials 3D. PLA filament with glitter gets a unique and shiny finish in your pieces.
This PLA filament minimizes printing layers, achieving a completely homogeneous surface and offers the same benefits as standard PLA filament, so high quality is guaranteed.

Print easily a lot of models with higher printing speed than other materials. You will not have pieces with warping as this material does not have contractions, so you will be able to print with high-resolution models with a good surface finish.

Polymaker Panchroma CoPE is a copolyester-based 3D printing filament designed for effortless printing and an exceptionally high-quality surface finish. Its innovative formula enhances bridging and overhang performance while enabling reliable high-speed printing at speeds of up to 400mm/s.

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.

Regular PLA is a very brittle material, which greatly limits its range of applications.  Polymaker PolyMax PLA was designed to change this.  Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.

Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.

Regular PLA is a very brittle material, which greatly limits its range of applications.  Polymaker PolyMax PLA was designed to change this.  Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.