Smarfil PLA is a high-quality PLA filament by Spanish manufacturer Smart Materials 3D. The Smartfil PLA Skin range is a series of PLA filaments with skin colour tones, these are especially indicated for applications of anatomical models, medical splints and orthoses in general, as well as 3d modelling and prototyping to achieve the most precise skin hue possible.

Devil Design spray is an adhesive in a pump spray bottle based on thermoplastic copolymers for 3D printing. 3DLac Plus is ultrafast drying, simple application, easy to clean with water, and a good adhesive for ABS, PLA, PETG, and other 3D printing filaments. 

Polymaker PolyLite PETG is an affordable PETG filament with balanced mechanical properties and ease of printing. PolyLite PETG is just as easy to print as PolyLite PLA while offering an additional 20˚C heat resistance and more durability. This lends PolyLite PETG to more functional applications where PLA would lack the durability or heat resistance such as lighting fixtures, vibrational parts or more functional product design prototypes.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of graystone PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PLA filament was produced on request by marwiol.com by the Polish manufacturer 3D Kordo. Our 3D printing filament combines high quality at an affordable price.

3D printing filament is wound on a spool and vacuum-packed. The spool contains 1 kg of violet PLA filament 1,75 mm.

Sparkly black PETG 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Recommended printing temperature 220-250 °C

Heated bed temperature - 70-80°C

You can print at 90mm/s. 

Dimensions of the spool:

- Diameter: 20,0 cm,
- Height: 7,0 cm,
- Hole diameter: 5,2 cm. 

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of bright yellow PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Filament for 3D printing PETG of the Polish manufacturer 3DKordo in black matte. The modified polymer composition allows you to achieve a beautiful matte finish of the printed element.

PETG filament is a thermoplastic polymer from a group of polyesters in a utility version, intended for 3D printing using the FFF method. PETG filament, also known as polyethene terephthalate, is a copolyester known for its conductivity and ease of use. PETG filament has the stiffness and mechanical properties of ABS filament but is as easy to print as PLA filament.
The filament for printing PETG from the manufacturer 3DKordo is wound on a spool, it appeared in a vacuum.