Polymaker PolyLite PLA contains with increased quantity an additive thanks to which the printed element glows with its own, in this case, orange, light after prior exposure to light from the outside. Polymaker PolyLite PLA  is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology, ensuring consistent extrusion and preventing jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest developments in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

The material consists of two parts: an elastomer that is responsible for the rubber-like feel and material property, and a water-soluble ingredient. After printing, the object is placed in water whereby after one and four days, leaving behind the elastomer, and thus the soft porous object.

Rinse in water:
- print thin walls and heep filling rate as low as possible to shorten the time for rinsing
- gently rinse with water, hot water and patience provides good results
- you can clearly notice the effect and that the material is getting softer after one day
- after three days every PVA should be gone
- stir and change the water often
- you can reduce the rinsing time by using an ultrasonic cleaner
- remaining water can be removed from the object quickly by using a clothes dryer
- repeatedly rinsing: fresh water → Wait → Dryer → fresh water → Wait → Dryer
- PVA residues feel greasy, like sugar syrup
- remove all PVA residues

Poro-Lay are experimental filaments for experimental and experienced user. Help for processing and a great ideas for new 3D objects can be found in the prestigious forums.

The components of Poro-Lay are harmless and food safe. The water-soluble component is even biocompatible. However, we strongly advise not to eat the material. 

Poro-Lay is best stored dry. If the material absorbed moisture after some time, the filament can be dried in an oven at about 80 ° C for four to five hours. We recommend drying the filament before the very first print.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of graphite with metallic sheen PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Spectrum PET-G Glow in the Dark is a PET-G-based filament blended with a concentrated phosphorescent pigment which causes the phosphorescence effect. Accordingly, they will emit their light once the printed items are exposed to an external light source. The material has all the typical characteristics of the pure PET-G. The added pigment has a neutral impact on the material’s properties

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.

We are pleased to introduce the PC 275 filament, which is an excellent choice for all 3D printing enthusiasts and professionals looking for a material with exceptional properties. Spectrum PC 275 is a professional, high-class filament characterized by unrivalled features and parameters.

The modification of the Spectrum PC 275 filament composition aimed to reduce the high shrinkage typical of PC-based materials and to increase adhesion between layers. Thanks to this, PC 275 filament is characterized by excellent stability during the 3D printing process, which translates into excellent precision and accuracy of the printed objects. The filament also has improved flow parameters allowing printing at high speeds.

We are pleased to introduce the PC 275 filament, which is an excellent choice for all 3D printing enthusiasts and professionals looking for a material with exceptional properties. Spectrum PC 275 is a professional, high-class filament characterized by unrivalled features and parameters.

The modification of the Spectrum PC 275 filament composition aimed to reduce the high shrinkage typical of PC-based materials and to increase adhesion between layers. Thanks to this, PC 275 filament is characterized by excellent stability during the 3D printing process, which translates into excellent precision and accuracy of the printed objects. The filament also has improved flow parameters allowing printing at high speeds.

Temperature Range:
240 – 280 °C

Recommended 3D printing temperature:
250 – 270 °C

Recommended 3D print speed:
30 – 50 mm/s

Recommended Heated bed:
90-105 °C

PolyTerra™ PLA is a bioplastic 3D printing filament designed from the ground up to create the next generation of environmentally friendly filaments. Polymaker has combined organic minerals with PLA which significantly reduces the plastic content producing a more environmentally friendly 3D printing material.