PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of light green PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

250˚C – 270˚C

Printing Speed:
30 – 50mm/s

Bed Temperature:
90˚C – 105˚C

Chamber Temperature:
90˚C – 100˚C

Young’s Modulus:
1832 ± 65 (MPa)

Tensile Strength:
39.9 ± 1.0 (MPa)

Bending Strength:
66.3 ± 1.3 (MPa)

Charpy Impact Strength:
25.8 ± 1.4 (kJ/m2)

The highest quality Everfil PC-ABS 3D printing filament from the Polish manufacturer, 3D Kordo.

Everfil PC-ABS 3D printing filament is a blend of PC/ABS polymers that provide enhanced mechanical and heat resistance, as well as a good surface print finish and good surface metal adhesion. Models printed from Everfil PC-ABS filament are designed for applications requiring high deflection temperature under load and high strength at low and high temperatures.

3D printing filament by Czech manufacturer Plasty Mladec MARBLEJet, based on PLA filament, contains a mixture of special additives that will make your models have the look of stone/marble. The Plasty Mladec brand is a guarantee of the quality and dimensional accuracy of the PLA filament. The material is biodegradable and suitable for printing large objects.

Gel-Lay is another 3D printing filament created by Kai Parthy, the creator of such filaments as LayWood, Lay Brick and Reflect-o-Lay. Gel-Lay filament is a 3D printing material with two components: an elastomer similar to rubber (TPU) and a water-soluble (PVA). After printing, place the item in water. After one to four days water-soluble (PVA) component dissolves. As a result, we received a soft, porous item. Importantly, the pores are not visible to the naked eye. The Gel-Lay filament is characterized by negligible deformation during printing.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of pink with pearl shine PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA ESD filament is made of polyamide 6 (PA6) with the addition of ground carbon, thanks to which it has antistatic properties. This feature of PA ESD filament makes this material suitable for printing protective elements of electronic components.

Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

Polymaker Fiberon™ PA6-CF20 is a carbon fiber-reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement significantly improves stiffness, strength, and heat resistance, as well as outstanding layer adhesion.

Fiberon™ PA6-CF20 is the same great formula as PolyMide PA6-CF, although Fiberon™ PA6-CF20 may print in a slightly darker black shade color than its predecessor.