Temperature Range:
240 – 280 °C

Recommended 3D printing temperature:
250 – 270 °C

Recommended 3D print speed:
30 – 90 mm/s

Recommended Heated bed:
If equipped set Heating Bed to 80 °C

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PETG AM filament is a PETG filament with antibacterial properties, in addition to printing hobby, demonstration and prototype elements. Tarfuse® PA AM is approved for contact with food in accordance with Regulation (EU) 10/2011 and subsequent amendments.

Details in 3D technology, i.e. as well as prototypes and functional details due to the fact that the layered function can affect the environment for the development of bacteria and fungi. Even after a basic wash often no extra detail can be obtained, this is critical for children's hobby prints. Thanks to the elements made of antibacterial filament, the proliferation of bacteria and fungi is therefore reduced, and the risk of spreading germs among users is reduced.

Innovatefil PP-CF by Spanish manufacturer, Smart Materials 3D is a polypropylene-based filament reinforced with a high carbon fibre load, which considerably improves the final piece's dimensional stability, achieving very good quality finishes. Furthermore, thanks to incorporating these fibres, we obtain a stiffer material than standard PP, but with enough flexibility to provide high-impact, mechanical and thermal resistance.

The best quality grey PLA 1,75 mm 3D printing filament from a Polish manufacturer, Devil Design in the colour of most PC computer cases from the 1990s.

PLA 3D printing filament from a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg net of PLA filament in silver colour.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of emerald green PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.

Regular PLA is a very brittle material, which greatly limits its range of applications.  Polymaker PolyMax PLA was designed to change this.  Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

PolyFlex™ is a highly flexible yet easy to print 3D printing material. Featuring good elasticity and a large strain-to-failure, PolyFlex™ opens up a completely new realm of applications. jams.

PolyFlex™️ TPU90, created from Covestro’s Addigy®️ family, is a thermoplastic polyurethane (TPU) based filament designed to provide great flexibility without compromising on printing speed. It also has the ability to resist ultra-violet (UV) light or sunlight.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.