PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of dark violet PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of brown PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Smartfil Boun is a very flexible filament based on PLA developed by Spanish manufacturer Smart Materials 3D with mechanical properties similar to polypropylene. Due to its flexibility, you can develop completely semi-rigid figures very resistant to impact, we can obtain pieces with an exceptional finish and a very nice soft touch that will not remind you of plastic. It is a material compatible with most printers in the market because it does not need to have a heated base, in addition, Smartfil Boun is a material without contractions or warping so you can make pieces of any size.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Polymaker PolyLite PLA contains with increased quantity an additive thanks to which the printed element glows with its own, in this case, green, light after prior exposure to light from the outside. Polymaker PolyLite PLA  is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology, ensuring consistent extrusion and preventing jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest developments in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PETG FR is a flame-retardant material in class V0 UL94. It is made of high-quality PETG modified with cyclohexanedimethanol. This material is characterised by high mechanical strength, good adhesion of individual layers, and low linear shrinkage. It is characterised by high ease of printing at the level of unmodified PETG. It does not contain halogen derivatives, red phosphorus or asbestos

3DLac Plus spray is an adhesive in a pump spray bottle based on thermoplastic copolymers for 3D printing. 3DLac Plus is ultrafast drying, simple application, easy to clean with water, and a good adhesive for ABS, PLA, PETG, and other 3D printing filaments. 

Spectrum PETG MATT is a PETG-based material with a chemical composition modified so that it is possible to obtain matte surfaces of printed objects. The matte finish of printed items considerably improves their aesthetic properties and also minimises the visibility of layers on the side surfaces of printed items.

In addition, Spectrum PETG MATT maintains all the features of PETG-based classic polymers, i.e., easy and highly efficient printing, low shrinkage and very good adhesion between layers and also between the build platform and printed object. Further, the use of admixtures has improved temperature resistance, and impact resistance and lowered the brittleness of printed items.

PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight.

PolyLite™ LW-PLA is not an active foaming filament, which means it will not foam when extruded from the nozzle depending on the temperature. PolyLite™ LW-PLA is already pre-foamed.