Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PETG FR is a flame-retardant material in class V0 UL94. It is made of high-quality PETG modified with cyclohexanedimethanol. This material is characterised by high mechanical strength, good adhesion of individual layers, and low linear shrinkage. It is characterised by high ease of printing at the level of unmodified PETG. It does not contain halogen derivatives, red phosphorus or asbestos

Filament for 3D printing PETG of the Polish manufacturer 3DKordo in blue matte. The modified polymer composition allows you to achieve a beautiful matte finish of the printed element.

PETG filament is a thermoplastic polymer from a group of polyesters in a utility version, intended for 3D printing using the FFF method. PETG filament, also known as polyethene terephthalate, is a copolyester known for its conductivity and ease of use. PETG filament has the stiffness and mechanical properties of ABS filament but is as easy to print as PLA filament.
The filament for printing PETG from the manufacturer 3DKordo is wound on a spool, it appeared in a vacuum.

Spectrum PET-G Carbon is a modified, PETG-based filament blended with carbon fibres which contributes to a considerably higher rigidity, hardness and tensile resistance while retaining low shrinkage and very good adhesion to build platforms typical for pure PETG. The 10% addition of carbon fibres enables to obtaining of matte surfaces of printed items, which greatly improves the aesthetic properties of printed items.

Plastic filament out of PET 1,75 mm in brown, green, purple. 

Kit contains five meters for each colour of filament.

Filament produced in the Czech Republic.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of red PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Polymaker Fiberon ASA-CF08 is a professional-grade filament reinforced with 8% chopped carbon fibre, created by Polymaker. It combines the legendary weather resistance of ASA with the stiffness and matte finish of carbon fibre. With a bending strength of 69.1 MPa (XY) and tensile strength of 43.5 MPa (XY), ASA-CF08 offers the reliability needed for load-bearing and precision parts.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse® PA M filament, made of polyamide 6 (PA6), is characterized by very good mechanical strength and modified properties tribological, which causes a decrease in the coefficient of friction.

The highest quality Everfil PC-ABS 3D printing filament from the Polish manufacturer, 3D Kordo.

Everfil PC-ABS 3D printing filament is a blend of PC/ABS polymers that provide enhanced mechanical and heat resistance, as well as a good surface print finish and good surface metal adhesion. Models printed from Everfil PC-ABS filament are designed for applications requiring high deflection temperature under load and high strength at low and high temperatures.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.